West Berkshire · England

Bath Re-enamelling in Beansheaf Farm

Full bath re-enamelling and resurfacing at your home in Beansheaf Farm, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Beansheaf Farm

How it works

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It usually takes most of the day, and you are welcome to carry on with your day while we work.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Getting ready for the visit

  • Make sure the area is dry
  • Mention any parking restrictions or tricky access
  • Mention if the room is upstairs or in a flat

Ask for a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Send photos for a quote

Advice

Bath re-enamelling in Beansheaf Farm, done in place

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with a coloured bath you want in white and lots of chips and rust spots, we can help, on basins & shower trays, cast iron baths and pressed steel baths alike.

Every job is backed for twelve months in Beansheaf Farm and everywhere else. If something goes wrong with the work, we come back.

Where
Beansheaf Farm (RG31, RG30)
County
West Berkshire
Warranty
A year, on every repair
Quotes
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

When a repair is not the answer

A repair is not right for every job, for example:

  • A bath split right through the body
  • A poorly supported acrylic bath, until it’s firmed up
  • Anything hidden under an old coating, until we remove it

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we work on in Beansheaf Farm

  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths

FAQs for Beansheaf Farm

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Can a failed resurfacing be redone?

In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

Do you cover Beansheaf Farm?

Yes, we do. Technicians travel to Beansheaf Farm from across the region, and the price is the same as everywhere else.

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

What does bath re-enamelling cost?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

Common problems we fix in Beansheaf Farm

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Keep an eye out for any of the following:

  • A coloured bath you want in white
  • Staining under the taps and around the waste
  • Worn patches where water runs and sits
  • Lots of chips and rust spots

Questions to ask before booking

  • How your room will be protected
  • Aftercare advice
  • What preparation is included
  • How changes to the job are handled

How to compare quotes

Why repair rather than replace?

If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Beansheaf Farm clients choose us

  • Colour mixed on the day to match
  • Straight answers about what a repair can do
  • Everything repaired in place
  • Every repair guaranteed for a year

See our full price list or guide to resurfacing and replacement costs.

What bath re-enamelling costs

Prices start from £350. We do not charge extra for travel to Beansheaf Farm. The price depends on:

  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • How many items we do on one visit

What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.

Getting a price from pictures

You can generally get a fixed quote without us visiting. To make it quick:

  • Where you are, by postcode
  • Natural light rather than flash
  • Any details about the material
  • Something in shot to show the size

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Beansheaf Farm and the surrounding area

Beansheaf Farm is about 3 miles west of Reading, in West Berkshire. Clients in Beansheaf Farm get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Our repair technicians cover all 155 towns and villages across West Berkshire, from the larger towns to small villages. Our jobs stretch from Beansheaf Farm to London (about 41 miles away).

We cover every part of the RG31 and RG30 postcode area. Streets in the area include Mill Lane, Curtis Road and Barclay Road. Other places close to Beansheaf Farm include Calcot (1 mile north-west), Fords Farm (1 mile east), Horncastle (1 mile north-east), Burghfield Bridge (1 mile south-east) and Tilehurst Within (1 mile north-east). Larger places within reach include Newbury (12 miles west), Thatcham (10 miles west), Burghfield Common (3 miles south), Speenhamland (12 miles west), Spencers Wood (4 miles south-east) and Shaw (12 miles west).

Landmarks near Beansheaf Farm

We visit homes around Calcot Infant School and Nursery, Calcot Park and Little Heath School. Also close by are Murdochs pub (under half a mile north) and Church of St Michael (1 mile north-east). The closest station to Beansheaf Farm is Theale station, roughly 1.4 miles west of the centre. A little further out are Broad Street Mall (3.1 miles east) and Battle Hospital (2.4 miles north-east). The countryside around Beansheaf Farm includes Hosehill Lake and Moor Copse Nature Reserve.

Map of Beansheaf Farm © OpenStreetMap contributors

Repairs by material

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

How to look after the repair

Most damage we see is avoidable. These habits help:

  • A quick wipe after use keeps limescale away
  • Store bottles off the bath
  • Have chips seen to early
  • Respect the curing time we give you

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.