West Berkshire · England
Bath Re-enamelling for Spencers Wood homes
Full bath re-enamelling and resurfacing at your home in Spencers Wood, with a one-year guarantee on every repair.
- Resurfacing from £350
- Stains that will not shift
- A coating lifting around the plughole
Bath re-enamelling in Spencers Wood, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We’re often asked to fix a peeling or bubbling previous coating and several chips and rust patches, across Victorian roll-tops, acrylic baths and cast iron baths.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Spencers Wood (RG7, RG2)
- Region
- West Berkshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Spencers Wood. The price depends on:
- How many items we do on one visit
- How much damage there is
- Access to the area
- The material and finish
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- Any details about the material
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- One picture of the whole bath
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We regularly work with letting and managing agents. Send the address, photos and access details.
Common problems we fix in Spencers Wood
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a photo:
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- Stains that will not shift
- Wear marks under the taps
Questions to ask before you book
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
- How soon you can use it again
- What protection goes down before work starts
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Questions from Spencers Wood
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
How the visit works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
- Clear the area around the damage
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Read more
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.
Why choose Surface Doctor in Spencers Wood
- Honest advice, even when it means no job
- We leave the room as we found it
- Most jobs done in one visit
- Fixed prices from your photos
Take a look at our full price list and bath cost comparison.
Also near Spencers Wood
More services for Spencers Wood
Spencers Wood and nearby
Spencers Wood is about 4 miles south of Reading, in West Berkshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Spencers Wood is one of 155 towns and villages in West Berkshire where we work. You can also see our page for London, about 38 miles away.
Here we cover the RG7 and RG2 postcode area. From The Square, Green End Close and Salmon Close or anywhere nearby, we can come to you. Neighbouring places we cover include Grazeley (1 mile west), Swallowfield (1 mile south), Beech Hill (2 miles south-west), Riseley (2 miles south) and Arborfield Cross (3 miles east). We also work in nearby towns such as Newbury (15 miles west), Thatcham (12 miles west), Burghfield Common (4 miles west), Speenhamland (15 miles west), Calcot (5 miles north-west) and Shaw (15 miles west). Being one of West Berkshire’s larger places, Spencers Wood sees plenty of our work.
Landmarks near Spencers Wood
Our customers here include homes close to Oakbank, Ryeish Green School and St Michael and All Angels, among other places. Nearby too are Swallowfield Meadow (1.3 miles south-east), The Farriers Arms (under half a mile north-west) and Lambs Lane Primary School (0.7 miles south). Spencers Wood’s nearest station is Reading Green Park station, roughly 2.6 miles north-west of the centre. Further afield, we also cover the area around Beaumys Castle (1.4 miles south) and Royal Berkshire Hospital (3.9 miles north). The countryside around Spencers Wood includes Longwater and The Marshes Local Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
