Derbyshire · England
Bath re-enamelling & resurfacing in Beighton, Derbyshire
Bath re-enamelling across Beighton and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Wear marks under the taps
- Brown or grey marks that do not clean off
Bath re-enamelling in Beighton without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. If you’re dealing with brown or grey marks that don’t clean off and several chips and rust patches, we can help, on basins & shower trays, cast iron baths and acrylic baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Location
- Beighton (S20, S21)
- Region
- Derbyshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
About Beighton
Beighton is about 5 miles north of Staveley, in Derbyshire. Across the S20 area, we come to you. We work in all 532 towns and villages in Derbyshire. You can also see our page for Leeds, about 34 miles away.
We work across S20 and S21 and the streets around it. From Ringwood Road, Eckington Road and Holbrook Avenue or a nearby road, a technician can come to you. Close by, we cover Killamarsh (1 mile south-east), Mosborough (1 mile west), Plumbley (2 miles west), Hackenthorpe (2 miles west) and Swallownest (2 miles north). Further out, we also cover Chesterfield (8 miles south-west), Dronfield (6 miles west), Bolsover (7 miles south), Staveley (5 miles south), Clay Cross (12 miles south) and Clowne (5 miles south-east).
Landmarks near Beighton
We visit homes around Emmanuel Church, Westfield Sports College and Westfield School, among other places. The nearest railway station is Woodhouse station, about 2.3 miles north-west. Further afield, we also cover the area around Handsworth St Marys Museum (3.4 miles north-west) and Rotherham General Hospital (5.6 miles north).
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Beighton. The price comes down to:
- Where the damage is and how we get to it
- The colour and finish to match
- The material and finish
- Doing more than one item at once
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- One picture of the entire bath
- The material, if you know it
- One sharp close-up of the damage
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Repair or replace in Beighton?
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Prices start from £350. Our prices are the same across the UK, with no extra for Beighton. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Beighton
- Colour-matched on site
- A fixed quote before booking
- Every repair guaranteed for a year
- No extra charge for your area
Read our full price list or resurfacing vs replacement cost guide.
Also near Beighton
Other services in Beighton
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Landlords, agents and businesses in Beighton
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
The process
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
Get a quote
Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Beighton, and we’ll come back with a fixed quote.
Advice
Common questions in Beighton
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
How much does bath re-enamelling cost in Beighton?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we’ll plan for it.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Which areas do you work in?
Everywhere in the UK, Beighton included. There’s no extra charge for travel.
Can you quote from pictures?
Nearly always. If photos don’t show enough, we will ask for another angle.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What we are called out for in Beighton
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- A coloured bath you want in white
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
- A period or roll-top bath worth keeping
What to look for in a quote
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- How soon you can use it again
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Leave the bath for the full curing time before using it
- Have chips seen to early
- Repair dripping taps early
- Avoid suction-cup mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
