Derbyshire · England
Bath Re-enamelling for Clowne homes
Fixed-price bath re-enamelling in Clowne and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
Prices and what affects them
Resurfacing from £350. We price every job individually. The main factors are:
- How many items we do on one visit
- How easy the damage is to reach
- Unusual colours or finishes
- The type of damage
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- A close-up of the damage, in focus
- Any details about the material
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Bath re-enamelling at your home in Clowne
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with a roll-top that’s seen better days and stains that won’t shift, we can help, whatever the material.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Clowne (S43)
- County
- Derbyshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly.
What we work on
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Aftercare tips
So the finish stays in good condition for years:
- Wash away dyes and oils after use
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
- Never use suction bath mats
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why us?
- Work done at your home or business
- No need to remove anything
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
Read our full price list or bath cost comparison.
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
For landlords and businesses
We work for landlords, letting agents and housing providers in Clowne as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Clowne and nearby
Clowne is about 3 miles north of Bolsover, in Derbyshire. Jobs in Clowne are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in all 532 towns and villages in Derbyshire. You can also see our page for Leeds, about 39 miles away.
Our repair technicians cover all of S43 and the streets around it. You’ll find streets such as Station Road, High Street and Brookhill, all of which we cover. Neighbouring places we cover include Barlborough (1 mile north-west), Elmton (1 mile south-east), Oxcroft (1 mile south-west), New Barlborough (2 miles north-west) and Stanfree (2 miles south-west). Further out, we also cover Chesterfield (8 miles west), Dronfield (9 miles west), Bolsover (3 miles south), Staveley (4 miles west), Matlock (15 miles south-west) and Clay Cross (10 miles south-west).
Landmarks near Clowne
Typical jobs here are in homes near Clowne Infant and Nursery School, Nags Head pub and Church of St John the Baptist. Clowne’s nearest station is Creswell station, about 2 miles south-east of the centre. Nearby you will also find Bolsover Hospital (3.1 miles south) and Bolsover Castle (3.5 miles south-west).
Questions from Clowne
Do you come to Clowne?
Yes. We cover the entire UK and travel to Clowne. Send photos and we’ll quote, or call 0345 017 0787.
Can you repair something that’s been repaired before?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Keep a parking space free if you can
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
Ask for a price
Email us pictures of the damage and a wider shot of the whole item, with your S43 postcode, and we will come back with a fixed quote.
Read more
Nearby places to Clowne
Also in Clowne
Do you need bath re-enamelling in Clowne?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
People typically call us after spotting one of these:
- Wear marks under the taps
- Several chips and rust patches
- An old resurfacing that’s failing
- Brown or grey marks that don’t clean off
Comparing quotes
- How soon you can use it again
- How the room is protected while they work
- If travel is included in the price
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
