Bolton · England
Bath re-enamelling & resurfacing in Belmont, Bolton
Problem with your bath in Belmont? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Stains that will not shift
- Thin, worn enamel in places
Bath re-enamelling in Belmont, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Nothing is disconnected or removed. If you’re dealing with a peeling or bubbling previous coating and an outdated colour you’d like to change, we can usually put it right, whatever the material.
Big or small, you get the same one-year guarantee.
- Area
- Belmont (BL7)
- Region
- Bolton
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Belmont
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Places near Belmont
More services for Belmont
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
How to look after the repair
Looking after the surface is easy:
- Respect the curing time we give you
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs straight away
- Keep toiletries on a shelf rather than in the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
FAQs for Belmont
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Do you cover Belmont?
Yes. We work across the UK and travel to Belmont. Send pictures and we’ll quote, or call 0345 017 0787.
Do you cover the whole of Bolton?
We cover the entire UK, including Belmont and the rest of Bolton. Send your postcode with your photos and we’ll offer you dates.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
Getting ready for the visit
- Open a window if you can
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
About Belmont
Belmont is about 4 miles north-east of Horwich, in Bolton. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Belmont is one of 61 towns and villages in Bolton we cover. Our nearest city page is Manchester, about 16 miles away.
Our visits in BL7 are booked in the same way as anywhere else. From High Street, Maria Square and Anshaw Close or anywhere nearby, we can come to you. If you are just outside Belmont, we cover Dimple (2 miles east), Horrocks Fold (3 miles south-east), Egerton (3 miles south-east), Bull Hill (3 miles north-east) and Barrow Bridge (3 miles south). We also work in nearby towns such as Bolton (5 miles south-east), Horwich (4 miles south-west), Halliwell (4 miles south-east), Farnworth (7 miles south-east), Westhoughton (6 miles south) and Daubhill (6 miles south).
Landmarks near Belmont
Locally, our jobs take us to homes close to Church of St Peter and Turton Belmont Community Primary School. The nearest railway station is Entwistle station, roughly 3.5 miles east. Well-known places in the area include Blair Hospital (3.3 miles south-east) and Blackrod Castle Croft (4.7 miles south-west). Open spaces near Belmont include Noon Hill.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Straight answers about what a repair can do
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
- Same prices wherever you are
Take a look at our pricing and bath cost comparison.
What we can’t put right
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before you book. We look at:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- The type of damage
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Details of any past repairs
- Where you are, by postcode
- A close-up of the damage, in focus
For a price in Belmont, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
