East Sussex · England
Bath re-enamelling & resurfacing in Belmont, East Sussex
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Belmont. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A roll-top that’s seen better days
- Lots of chips and rust spots
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Bath re-enamelling in Belmont without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include an old resurfacing that’s failing and a dull, rough surface that won’t come clean, on acrylic baths, basins & shower trays and Victorian roll-tops.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Belmont (TN34, TN35)
- Area hub
- East Sussex
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Belmont and the surrounding area
Belmont is about 1 mile south-east of Hastings, in East Sussex. From the centre of Belmont to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our technicians cover all 289 towns and villages across East Sussex. Our jobs stretch from Belmont to London (53 miles away).
Jobs in TN34 and TN35 are booked in the same way as anywhere else. From Crown Lane, Croft Road and Manor Road or anywhere nearby, a technician can come to you. Other places close to Belmont include Hastings Old Town (1 mile south), Rock-a-Nore (1 mile south-east), America Ground (1 mile south-west), Blacklands (1 mile north-west) and St Helen's (1 mile north-west). Larger places within reach include Eastbourne (14 miles west), Bexhill-on-Sea (5 miles west), Hailsham (15 miles west), Polegate (15 miles west), Old Town (15 miles south-west) and Upper Horsebridge (15 miles west).
Local landmarks in Belmont
Locally, our jobs take us to homes close to Linton Gardens, Roman Catholic Church of St Mary Star of the Sea and Emmanuel Church. Also close by are The Roebuck Inn (less than half a mile south-east), Ark Castledown Primary Academy (less than half a mile north), William Parker Sports College (1.4 miles north-west) and University School (0.8 miles west). The nearest railway station is Ore station, roughly 0.5 miles north. Further afield, we also cover the area around Priory Meadow Shopping Centre (less than half a mile south-west) and Hastings Castle (less than half a mile south-west). For a walk, there is Church Wood and Robsack Wood.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
- Do not use the bath until it has fully cured
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Signs you need bath re-enamelling in Belmont
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Most people contact us after spotting one of these:
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Lots of chips and rust spots
- Staining under the taps and around the waste
What to look for in a quote
- How changes to the job are handled
- Who will actually do the work
- How soon you can use it again
- How to care for the finish
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
Towns and villages near Belmont
What else we do in Belmont
Questions from Belmont
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We give you timings with the quote.
What happens once I’ve sent photos?
You will get a fixed quote back. There’s no obligation to book.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why us?
- Everything repaired in place
- Honest advice, even when it means no job
- Fixed prices from your photos
- One-year guarantee on every repair
See our full price list and guide to resurfacing and replacement costs.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
