Kent · England
Bath re-enamelling & resurfacing in Beltring, Kent
Problem with your bath in Beltring? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
Beltring and the surrounding area
Beltring is about 5 miles east of Tonbridge, in Kent. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Beltring is one of 922 towns and villages in Kent we cover. Our nearest city page is London, about 30 miles away.
Jobs in TN12 are booked in the same way as anywhere else. We also travel to Branbridges (1 mile north), Snoll Hatch (1 mile north-west), East Peckham (1 mile north-west), Hale Street (1 mile north) and Little Mill (1 mile west). We also work in nearby towns such as Maidstone (7 miles north-east), Sevenoaks (11 miles north-west), Royal Tunbridge Wells (7 miles south-west), Tonbridge (5 miles west), Kings Hill (5 miles north) and Foley Park (8 miles north-east).
Near you in Beltring
Our clients here include homes close to Mascalls School, East Peckham Primary School and St Mary. Beltring has its own railway station: Beltring station. Other landmarks nearby include The Hop Farm Museum (0.5 miles south) and Tunbridge Wells Hospital (5.5 miles south-west). Green spaces nearby include Tudeley Woods RSPB reserve.
How we handle bath re-enamelling in Beltring
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, and can be used again the next day. Our technicians work on pressed steel baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are a dull, rough surface that won’t come clean and a coating lifting around the plughole.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Beltring (TN12)
- Area hub
- Kent
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Beltring
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
Questions to ask before you book
- Whether the price covers travel
- How long it needs to cure
- Aftercare advice
- Whether cleaning and preparation are in the price
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Have chips seen to early
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- Do not use the bath until it has fully cured
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
The process
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow most of the day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Make sure the area is dry
Getting a price
If you’re in Beltring and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
What you get with us
- Work done at your home or business
- A fixed quote before you book
- Honest advice, even when it means no job
- One-year guarantee on every repair
See our full price list and resurfacing vs replacement cost guide.
Towns and villages near Beltring
Other services in Beltring
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
FAQs for Beltring
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
What we cannot put right
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Beltring
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- How easy the damage is to reach
- Unusual colours or finishes
- Any earlier repairs that need removing first
- The size and number of damaged areas
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
Two or three clear photos are usually enough. Try to include:
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- Any details about the material
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
