Doncaster · England

Bath re-enamelling & resurfacing in Bentley, Doncaster

Bath re-enamelling in and around Bentley: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Bentley

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Bath re-enamelling in Bentley, done in place

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you are dealing with wear marks under the taps and staining under the taps and around the waste, we can help.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Before and after: an old basin refinished to bright white
Where
Bentley (DN5)
Area hub
Doncaster
Warranty
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Work for landlords and builders

If you manage property in Bentley, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • A bath split right through the body
  • An acrylic bath that flexes badly underfoot
  • Leaking taps or wastes (a plumber’s job)

Send us photos and we’ll tell you honestly.

Materials we work on in Bentley

  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays

Do you need bath re-enamelling in Bentley?

Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.

Signs it’s time to call us include:

  • Brown or grey marks that do not clean off
  • A period or roll-top bath worth keeping
  • Thin, worn enamel in places
  • Enamel that’s lost its shine and feels rough

What to look for in a quote

  • How the colour is matched
  • Whether the price covers travel
  • How changes to the job are handled
  • How to care for the finish

How to compare quotes

What happens on the day

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow most of the day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the next day, the bath is ready.

Preparing for the visit

  • Open a window if you can
  • Clear toiletries, mats and anything else from around the area
  • Mention if the room is upstairs or in a flat

Ask for a price

Most clients in Bentley get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Get a free quote

Read more

Keeping it looking good

Looking after the surface is easy:

  • Leave the bath for the full curing time before using it
  • Store bottles off the bath
  • Rinse off hair dye, oils and bath bombs right away
  • Get any chip repaired quickly

Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Repair or replace: which is better?

If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Why us?

  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited
  • One visit for most repairs
  • Work done at your home or business

See our full price list and bath cost comparison.

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Questions from Bentley

Can you make a coloured bath white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

How do I book?

Some pictures, your postcode and how to reach you. On the day, access to the room.

Can you price it without visiting?

Nearly always. If pictures don’t show enough, we will ask for another angle.

How soon can you come?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Can you redo someone else’s repair?

Yes, regularly. It can add a little time, which we include in the quote.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you resurface freestanding baths?

Yes. We can do the inside and outside.

Bentley and the surrounding area

Bentley is about 2 miles north-west of Doncaster, in Doncaster. Anywhere in DN5, we come to you. Bentley is one of 89 places in Doncaster where we work. We work right across the region, from Bentley to Leeds (25 miles away).

Jobs in DN5 are booked in the same way as anywhere else. That includes homes on High Street, Church Street and New Street. Being close to the A19 and A638, Bentley is simple for us to get to. If you’re just outside Bentley, we cover Scawthorpe (1 mile west), Cusworth (1 mile south-west), Scawsby (1 mile south-west), Arksey (1 mile north-east) and Sunnyfields (1 mile west). We also work in nearby towns such as Adwick le Street (3 miles north-west), Thorne (9 miles north-east), Conisbrough (6 miles south-west), Armthorpe (4 miles east), New Rossington (6 miles south-east) and Conanby (6 miles south-west). Bentley is among the bigger towns we cover in Doncaster.

Near you in Bentley

Typical jobs here are in homes near Town Fields, Bentley High Street Primary School and Danum Gallery and the streets around them. Other local landmarks include Church of St Peter (under half a mile south-east) and Don Valley Academy (1 mile west). There’s a railway station in Bentley itself: Bentley (South Yorkshire) station. Nearby you’ll also find Doncaster Royal Infirmary (1.9 miles south-east) and Kings Own Yorkshire Light Infantry Museum (1.8 miles south-east). Open spaces near Bentley include Highfields Lake and Thorpe Marsh Nature Reserve.

Map of Bentley © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.