Doncaster · England
Bath re-enamelling & resurfacing in Tilts, Doncaster
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Tilts. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
Landlords, agents and businesses in Tilts
If you manage property in Tilts, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
How we handle bath re-enamelling in Tilts
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on cast iron baths, acrylic baths and Victorian roll-tops, and people most frequently call us about a coloured bath you want in white and stains that won’t shift.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Tilts (DN5)
- Region
- Doncaster
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Tilts
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
What to look for in a quote
- A fixed quote, and whether VAT is included
- Whether the colour is mixed to match
- What happens if they find more damage
- Whether the price covers travel
What we can’t put right
We will always be straight with you, so here’s what a repair won’t do:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Tilts. The price depends on:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- How much damage there is
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
You can usually get a fixed quote without us visiting. To help us price it:
- What it’s made of, if you know
- A clear, close picture of the problem area
- One picture of the entire bath
- A coin or ruler next to the damage for scale
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to the best part of a day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Open a window if you can
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Looking after it afterwards
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Don’t let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
FAQs for Tilts
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Places near Tilts
Other services in Tilts
Repair or replace in Tilts?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Every repair guaranteed for a year
- Same prices wherever you are
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
See our full price list and guide to resurfacing and replacement costs.
Where we work around Tilts
Tilts is about 1 mile west of Bentley, in Doncaster. From the centre of Tilts to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 89 towns and villages across Doncaster. We work right across the region, from Tilts to Leeds (24 miles away).
Jobs in DN5 work the same way as everywhere else we cover. That includes homes on Bedale Road, Barnsley Road and Naseby Avenue and the roads around them. Close by, we cover Sunnyfields (1 mile north), Little Canada (1 mile west), Scawsby (1 mile south-east), Scawthorpe (1 mile north-east) and Cusworth (1 mile south-east). Larger places within reach include Doncaster (3 miles south-east), Thorne (10 miles north-east), Conisbrough (5 miles south-west), Armthorpe (5 miles east), New Rossington (6 miles south-east) and Conanby (5 miles south-west).
Local landmarks in Tilts
Locally, our jobs take us to homes close to Ridgewood School, St Leonard & St Jude and Rosedale Primary School, among other places. The nearest railway station is Bentley (South Yorkshire) station, roughly 1.2 miles east. Further afield, we also cover the area around Frenchgate Centre (2 miles south-east) and Hangthwaite (1.1 miles north). Open spaces near Tilts include Thorpe Marsh Nature Reserve and Highfields Lake.
About our accreditations · Every repair comes with a one-year guarantee.
