Devon · England

Bath re-enamelling & resurfacing in Bickleigh, Devon

Full bath re-enamelling and resurfacing at your home in Bickleigh, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Bickleigh

About our bath re-enamelling in Bickleigh

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and common reasons people get in touch are stains that won’t shift and lots of chips and rust spots.

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Bickleigh (EX16)
County
Devon
Warranty
One year on every repair
Price
From £350. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

About Bickleigh

Bickleigh is about 4 miles south of Tiverton, in Devon. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Bickleigh is one of 586 places in Devon where we work.

Here we cover the EX16 postcode area. We also travel to Cadeleigh (2 miles west), Silverton (3 miles south-east), Thorverton (3 miles south), Withleigh (4 miles north-west) and Upham (4 miles west). Further out, we also cover Exeter (9 miles south), Tiverton (4 miles north), Honiton (14 miles east), St Thomas (10 miles south), Larkbeare (10 miles south) and Polsloe (9 miles south).

Local landmarks in Bickleigh

Our clients here include homes close to Bickleigh Mill pub, Bickleigh on Exe Church of England Primary School and Church of St Mary and the streets around them. A little further out are Bickleigh Castle (within half a mile south-west) and Belmont Hospital (3.8 miles north). The countryside around Bickleigh includes Raddon Top.

Map of Bickleigh © OpenStreetMap contributors

Can I fix it myself?

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

How to look after the repair

Simple care helps the repair last. Our advice:

  • Wipe the bath dry after use in hard water areas
  • Store bottles off the bath
  • Do not leave a chip unrepaired
  • Never use suction bath mats

Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

What bath re-enamelling costs

Resurfacing from £350. You’ll know the full cost before you book. We take into account:

  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach
  • Unusual colours or finishes
  • How much damage there is

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Getting a price from photos

You can take the photos on your phone. Ensure they show:

  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.

What happens on the day

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes most of the day, and we finish by cleaning up and talking you through the result.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Clear the area around the damage
  • Mention any earlier repairs or resurfacing
  • Mention if the room is upstairs or in a flat

Ask for a price

Send us pictures of the damage and a wider shot of the entire item, and tell us you’re in Bickleigh, and we will reply with a fixed price.

Get a fixed price

Advice

Honest limits

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Problems we can’t see until an old finish comes off
  • Steel that has corroded right through
  • A bath split right through the body

If in doubt, send pictures and we’ll say what we think before you book.

Materials we work on in Bickleigh

  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths

Common questions in Bickleigh

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

What if the damage is worse than the pictures show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, access to the room.

Does re-enamelling smell?

There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.

Repair or replace: which is better?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • Dust sheets down, tidy finish
  • CHAS and Constructionline accredited
  • No extra charge for your area
  • Work done at your home or business

Take a look at our full price list and bath cost comparison.

Signs you need bath re-enamelling in Bickleigh

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Keep an eye out for these signs:

  • Stains that won’t shift
  • Chips and rust in more than one place
  • An old resurfacing that’s failing
  • An outdated colour you’d like to change

Comparing quotes

  • What happens if the damage is worse than the pictures show
  • Aftercare advice
  • Who turns up on the day
  • How long the guarantee is and what it covers

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.