Devon · England
Bath Re-enamelling for Silverton homes
Full bath re-enamelling and resurfacing for homes and businesses in Silverton and across Devon. Send photos for a free, fixed quote.
- Resurfacing from £350
- A coating lifting around the plughole
- Several chips and rust patches
Bath re-enamelling in Silverton without replacing anything
Most baths are re-enamelled in a day. Nothing is disconnected or removed. We’re often asked to fix a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean, in acrylic baths, cast iron baths and pressed steel baths.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Silverton (EX5)
- Region
- Devon
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Silverton
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What happens once I’ve sent photos?
We come back with a fixed quote. There’s no obligation to book.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Silverton.
Can you quote from photos?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Honest limits
In fairness, there are a few things a repair won’t fix:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Places near Silverton
Other services in Silverton
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
What you get with us
- Rooms protected and left tidy
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
Take a look at our full price list and resurfacing vs replacement cost guide.
Silverton and the surrounding area
Silverton is about 6 miles south of Tiverton, in Devon. Across the EX5 area, we come to you. We cover 586 places across Devon.
Every address in EX5 is within our area. From High Street, Church Road and Wyndham Road or anywhere nearby, we can come to you. We also cover the places around Silverton: Thorverton (2 miles west), Rewe (2 miles south), Nether Exe (2 miles south-west), Hele (2 miles east) and Berrysbridge (2 miles south-west). Further out, we also cover Exeter (7 miles south), Exmouth (14 miles south), Tiverton (6 miles north), Sidmouth (14 miles south-east), Honiton (13 miles east) and St Thomas (7 miles south).
Near you in Silverton
Around Silverton, we work in homes near Silverton Church of England Primary School, Parish Church of St Mary the Virgin and Lamb Inn, among other places. A little further out are Bickleigh Castle (2.6 miles north-west) and Whipton Hospital (6 miles south). The countryside around Silverton includes Raddon Top.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Signs you need bath re-enamelling in Silverton
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
If you can see any of these, send us a picture:
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
What your quote should include
- A fixed price, and whether VAT is included
- If travel is included in the price
- How long it needs to cure
- How changes to the job are handled
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Don’t use the bath until it has fully cured
- Avoid suction-cup mats
- Don’t leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Silverton. What changes the price is:
- Whether old repairs or coatings need taking off
- How much damage there is
- Access to the area
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, with no extra for Silverton. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- Natural light rather than flash
- What it’s made of, if you know
- Whether it’s been repaired or coated before
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
What we do, step by step
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for the best part of a day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Ensure the room can be ventilated
How to get a price
Upload a picture of the damage and one of the entire item, and tell us you are in Silverton, and we will come back with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
