Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Bickley Town, Cheshire West and Chester
Full bath re-enamelling and resurfacing for homes and businesses in Bickley Town and across Cheshire West and Chester. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
Bath re-enamelling in Bickley Town, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Whether it’s staining under the taps and around the waste and a coloured bath you want in white, we can usually put it right, on acrylic baths, basins & shower trays and cast iron baths alike.
Every job is backed for twelve months in Bickley Town and everywhere else. If something goes wrong with the work, we come back.
- Where
- Bickley Town (SY14)
- Region
- Cheshire West and Chester
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Bickley Town
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
If you can see any of these, send us a photo:
- A roll-top that is seen better days
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
What your quote should include
- How the colour is matched
- What happens if the damage is worse than the pictures show
- How to look after the finish
- Who turns up on the day
How the visit works
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Where we work around Bickley Town
Bickley Town is about 8 miles west of Nantwich, in Cheshire West and Chester. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Bickley Town is one of 224 places in Cheshire West and Chester we cover. We work right across the region, from Bickley Town to Liverpool (27 miles away).
All of SY14 is within our area, from the main roads to the quietest streets. Other places close to Bickley Town include Hetherson Green (1 mile north), No Man's Heath (1 mile south-west), Tushingham (1 mile south-west), Hampton Heath (2 miles west) and Ebnal (2 miles west). Within a short drive, we also cover Chester (14 miles north-west), Winsford (13 miles north-east), Boughton (13 miles north-west), Hoole (13 miles north-west), Newtown (14 miles north-west) and Over (12 miles north-east).
Near you in Bickley Town
Locally, our jobs take us to homes close to Bishop Heber High School and St Wenefrede's Church and the streets around them. For rail, the closest station is Wrenbury station, about 4.5 miles east. Other landmarks nearby include Castle Hill motte (2.9 miles west) and Whitchurch Community Hospital (4.3 miles south). Green spaces nearby include Bickerton Hill.
- Parks and local facilities nearby include Tushingham cum Grindley (1.5 miles south)
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- The type of damage
- The material
- Previous DIY repairs that have to come out
- Doing more than one item at once
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
Phone photos are fine. Just ensure we can see:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Any details about the material
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Your questions about bath re-enamelling in Bickley Town
Do you work in Bickley Town?
Yes. We cover the entire UK and come to Bickley Town and the rest of Cheshire West and Chester. Send us photos for a fixed quote, or call 0345 017 0787.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Towns and villages near Bickley Town
More services for Bickley Town
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Looking after it afterwards
It’s all simple stuff:
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Store bottles off the bath
- Keep suction mats out of the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Repair or replace in Bickley Town?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- No extra charge for your area
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
See our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
