Wolverhampton · England
Bath re-enamelling & resurfacing in Bilston, Wolverhampton
Our technicians come to Bilston for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping

Common problems we fix in Bilston
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Customers typically contact us about:
- Chips and rust in more than one place
- An outdated colour you’d like to change
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
Before you book anyone
- Whether they match the colour on site
- How the room is protected while they work
- What preparation is included
- Is the price fixed, and does it include VAT?
About our bath re-enamelling in Bilston
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for a period or roll-top bath worth keeping and wear marks under the taps, in pressed steel baths, cast iron baths and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Bilston (WV14, WV2, WS10, WV1)
- County
- Wolverhampton
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026

Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs straight away
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- The material and finish
- The size and number of damaged areas
- Access to the area
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send photos for a quote
You can take the pictures on your phone, there is no need for anything special. Make sure they show:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- Any details about the material
- Where you are, by postcode
Most customers in Bilston get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Bilston: your questions answered
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Do you cover Bilston?
We do. Repair technicians travel to Bilston from across the region, and the price is the same as everywhere else.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
Landlord and trade work in Bilston
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Bilston. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- No need to remove anything
- Work done at your home or business
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
See our pricing and guide to resurfacing and replacement costs.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Our work in Bilston
Bilston is about 3 miles south-east of Wolverhampton, in Wolverhampton. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Bilston is one of 96 towns and villages in Wolverhampton we cover. Our nearest city page is Birmingham, about 10 miles away.
We work across the WV14, WV2, WS10 and WV1 postcode area. Streets in the area include Station Road, Market Way and High Street. Being close to the A41 and A463, Bilston is easy for our technicians to reach. We also cover the places around Bilston: The Lunt (1 mile north-east), Moxley (1 mile south-east), Bradley (1 mile south), Portobello (1 mile north) and Woods Bank (1 mile east). We also work in nearby towns such as Wolverhampton (3 miles north-west), New Invention (3 miles north-east), Gornal (4 miles south-west), Perton (6 miles west), Short Heath (3 miles north-east) and Springfield (3 miles north-west). Bilston is among the bigger towns we cover in Wolverhampton.
Landmarks near Bilston
Around Bilston, we work in homes near Bilston School of Art, Ormiston SWB Academy and Church of St Leonard. Also close by are East Park (1.5 miles north-west), White Rose Public House (under half a mile north-west) and Holy Trinity Catholic Primary School (less than half a mile north-east). Bilston’s nearest station is Willenhall station, about 1.4 miles north-east. A little further out are Royal Hospital (2.3 miles north-west) and Bilston Craft Gallery (under half a mile north). Open spaces near Bilston include Peascroft Wood and Beacon Hill.
Places near Bilston
What else we do in Bilston
About our accreditations · Every repair comes with a one-year guarantee.

