West Sussex · England

Bath Re-enamelling in Birdham

Problem with your bath in Birdham? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Birdham

How we handle bath re-enamelling in Birdham

Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Common call-outs are for a peeling or bubbling previous coating and brown or grey marks that don’t clean off, on basins & shower trays, acrylic baths and cast iron baths.

Every repair is covered by our one-year guarantee.

Location
Birdham (PO20)
Region
West Sussex
Guarantee
One year on every repair
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Common questions in Birdham

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

Does re-enamelling smell?

There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.

How durable is a resurfaced bath?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What happens if you find more damage?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

How the visit works

Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes most of the day in most cases. The room is left tidy and ready to use once it has cured.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Open a window if you can
  • Mention any parking restrictions or tricky access

Ask for a price

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Get a free quote

Related advice

What a repair can’t fix

Some jobs aren’t right for a repair, including:

  • Leaks from fittings rather than the bath
  • Steel that has corroded right through
  • A metal bath with a through crack

Send us photos and we’ll tell you honestly before you book.

What we work on

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays

For landlords and businesses

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Don’t let dyes or oils sit on the finish
  • Never use suction bath mats
  • Stick to gentle, non-abrasive cleaners
  • Keep toiletries on a shelf rather than in the bath

Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.

On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.

Our work in Birdham

Birdham is about 4 miles south-west of Chichester, in West Sussex. From the centre of Birdham to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Birdham is one of 371 towns and villages in West Sussex we cover. Our jobs stretch from Birdham to London (58 miles away).

Our repair technicians cover all of the PO20 postcode area. Jobs here include addresses on Old Common Close, Main Road and Walwyn Close and the roads around them. We also travel to Somerley (1 mile south-west), Almodington (1 mile south), Shipton Green (1 mile west), Highleigh (2 miles south-east) and Earnley (2 miles south). Within a short drive, we also cover Bognor Regis (6 miles east), Chichester (4 miles north-east), Selsey (5 miles south-east), Littlehampton (13 miles east), Emsworth (6 miles north-west) and Rustington (14 miles east).

Around Birdham

Our customers here include homes close to The Birdham Public House, Birdham CE Primary School and St James' Church, among other places. The nearest railway station is Fishbourne station, roughly 3.3 miles north of the centre. Other landmarks nearby include Chichester Castle (4.1 miles north-east) and St Richard's Hospital (4.4 miles north-east). Open spaces near Birdham include Pilsey Island.

Map of Birdham © OpenStreetMap contributors

Signs you need bath re-enamelling in Birdham

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.

It’s worth getting a quote if you see:

  • Lots of chips and rust spots
  • A period or roll-top bath worth keeping
  • Wear marks under the taps
  • A bath that stays dull however much you clean it

What your quote should include

  • Whether the colour is mixed to match
  • How soon you can use it again
  • Who will actually do the work
  • Is the price fixed, and does it include VAT?

10 questions to ask before booking

Can I fix it myself?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Prices and what affects them

Resurfacing from £350. You will not pay by the hour. The price depends on:

  • Whether old repairs or coatings need taking off
  • The colour and finish to match
  • What the surface is made of
  • The type of damage

We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

A couple of clear pictures is all it takes. It helps if you send:

  • The postcode, so we can plan the visit
  • A coin or ruler next to the damage for scale
  • Any details about the material
  • One picture of the entire bath

If you are in Birdham and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

What your bath is made of matters

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.