County Durham · England
Bath Re-enamelling for Birtley homes
Bath re-enamelling in and around Birtley: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
How we handle bath re-enamelling in Birtley
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Common call-outs are for a period or roll-top bath worth keeping and an outdated colour you’d like to change, on pressed steel baths, cast iron baths and acrylic baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Birtley (DH3)
- County
- County Durham
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Generally one visit, start to finish
- We come to you, anywhere in the UK
- We leave the room as we found it
- Everything repaired in place
Read our prices page and bath cost comparison.
What we’re called out for in Birtley
Often the bath has just had decades of use. The body of the bath is generally perfectly sound.
Common reasons people in Birtley contact us are:
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
- Chips and rust in more than one place
What your quote should include
- How changes to the job are handled
- If travel is included in the price
- Aftercare advice
- How long the guarantee is and what it covers
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Holes rusted through the metal
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Getting ready for the visit
- Open a window if you can
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Read more
What affects the price in Birtley
Prices start from £350. We charge the same across the UK, including Birtley. What changes the price is:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- The colour and finish to match
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- Any details about the material
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Birtley and the surrounding area
Birtley is about 2 miles west of Washington, in County Durham. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We cover all 329 towns and villages across County Durham. Our nearest city page is Newcastle upon Tyne, about 7 miles away.
We work across DH3 and the streets around it. Streets in the area include Rutland Square, Primrose Terrace and Woodbine Terrace, all of which we cover. We also cover the places around Birtley: Oxclose (1 mile east), Lambton (1 mile south-east), Ouston (1 mile south-west), Rickleton (2 miles south-east) and Washington (2 miles east). Within a short drive, we also cover Durham (8 miles south), Consett (11 miles west), Spennymoor (14 miles south), Seaham (10 miles south-east), Chester-le-Street (3 miles south) and Peterlee (13 miles south-east).
Near you in Birtley
Around Birtley, we work in homes near Ravensworth Terrace Primary School, Lord Lawson of Beamish Academy and Church of St John the Evangelist, among other places. The closest station to Birtley is Chester-Le-Street station, about 3 miles south. A little further out are Bowes Railway (1.7 miles north) and Chester-le-Street (2.6 miles south). The countryside around Birtley includes WWT Washington.
Your questions about bath re-enamelling in Birtley
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Aftercare tips
So the finish stays in good condition for years:
- Don’t leave a chip unrepaired
- Do not let dyes or oils sit on the finish
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Other services in Birtley
About our accreditations · Every repair comes with a one-year guarantee.
