County Durham · England
Bath re-enamelling & resurfacing in Ouston, County Durham
Full bath re-enamelling and resurfacing at your home in Ouston, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Several chips and rust patches
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Bath re-enamelling in Ouston, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We work on pressed steel baths, cast iron baths and basins & shower trays, and people most frequently call us about a period or roll-top bath worth keeping and staining under the taps and around the waste.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Ouston (DH2)
- County
- County Durham
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Do not leave a chip unrepaired
- A dripping tap should be fixed promptly
- Don’t use the bath until it has fully cured
- Don’t let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Where we work around Ouston
Ouston is about 2 miles north of Chester-le-Street, in County Durham. Our technicians come to clients in Ouston, so nothing has to leave your home. We work in all 329 towns and villages in County Durham, from the larger towns to small villages. Our jobs stretch from Ouston to Newcastle upon Tyne (about 7 miles away).
Our visits in DH2 work the same way as everywhere else we cover. We regularly work on streets such as Iris Crescent, Cromarty and Aberfoyle. We also travel to Birtley (1 mile north-east), South Pelaw (2 miles south-east), Rickleton (2 miles east), Chester-le-Street (2 miles south) and Lambton (2 miles east). We also work in nearby towns such as Durham (7 miles south), Consett (10 miles west), Spennymoor (13 miles south), Seaham (11 miles east), Peterlee (13 miles south-east) and Stanley (4 miles west).
Around Ouston
In Ouston, that means homes near Church of the Holy Trinity, Ouston Primary School and Lord Lawson of Beamish Academy. Ouston’s nearest station is Chester-Le-Street station, about 2.2 miles south of the centre. Further afield, we also cover the area around Ankers House Museum (2.2 miles south-east) and Lambton Castle (2.8 miles south-east). Not far away are WWT Washington.
- Parks and local facilities nearby include Chester-le-Street (2 miles south-east)
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Towns and villages near Ouston
More services for Ouston
When to call us in Ouston
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Contact us if you’ve noticed:
- Several chips and rust patches
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
What your quote should include
- What happens if they find more damage
- A fixed price, and whether VAT is included
- If travel is included in the price
- What preparation is included
What we do, step by step
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day. Before leaving, we tell you when it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
Get a quote
Most clients in Ouston get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Repair or replace in Ouston?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Ouston customers choose us
- Usually one visit, start to finish
- Fixed prices from your pictures
- Everything repaired in place
- Rooms protected and left tidy
See our pricing or resurfacing vs replacement cost guide.
Landlord and trade work in Ouston
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Landlords, letting agents and housing providers in Ouston use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Ouston questions
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
When a repair is not the answer
It helps to know what we can’t do too:
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
