Luton · England
Bath re-enamelling & resurfacing in Biscot, Luton
Local bath re-enamelling for Biscot: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Thin, worn enamel in places
Bath re-enamelling in Biscot without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. We regularly repair basins & shower trays, cast iron baths and acrylic baths, and common reasons people get in touch are a roll-top that’s seen better days and worn patches where water runs and sits.
Every job is backed for twelve months in Biscot and everywhere else. We return to put right any problem with the work.
- Location
- Biscot (LU3, LU2, LU4)
- Area hub
- Luton
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- A fixed quote before you book
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
- Every repair guaranteed for a year
See our full price list and guide to resurfacing and replacement costs.
How it works
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t let dyes or oils sit on the finish
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- What the surface is made of
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
The price reflects the work involved, not where you live. The full price is agreed before booking.
Send pictures for a quote
You can normally get a fixed price without us visiting. To help us price it:
- Details of any past repairs
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- One picture of the whole bath
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Towns and villages near Biscot
Other services in Biscot
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Biscot and the surrounding area
Biscot is about 1 mile south-east of Luton, in Luton. Wherever you are in the LU3 postcode area, we carry out the work at your property. Biscot is one of 53 towns and villages in Luton where we work. Our jobs stretch from Biscot to London (about 31 miles away).
Here we cover the LU3, LU2 and LU4 postcode area. From Oak Road, Dane Road and Ascot Road or anywhere nearby, we can come to you. Biscot is on the A5228, so it’s easy for us to reach. If you are just outside Biscot, we cover Luton (1 mile north-west), Maidenhall (1 mile west), High Town (1 mile south-east), Dallow (1 mile south) and Round Green (1 mile east). Within a short drive, we also cover Lewsey Farm (3 miles west), Lewsey Park (3 miles west), Wigmore (3 miles east), Sundon Park (3 miles north-west) and Slip End (3 miles south).
What’s near Biscot
Around Biscot, we work in homes near Painters Arms, Denbigh High School and Wardown Park. Also close by are River Bank Primary School (within half a mile north-east), St Andrew's Church (under half a mile south) and Rabia Girls' and Boys' School (0.7 miles south-west). For rail, the closest station is Luton station, about 0.9 miles south-east. Nearby you’ll also find Bedfordshire And Hertfordshire Regiment Museum (less than half a mile east) and The Mall Luton (1 mile south-east). The countryside around Biscot includes Warden Hill and Blow's Down.
Landlords, agents and businesses in Biscot
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams in Luton and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Signs you need bath re-enamelling in Biscot
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted any of these:
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- An old resurfacing that’s failing
- Lots of chips and rust spots
Questions to ask before booking
- What happens if the damage is worse than the photos show
- The length of the guarantee and what it covers
- What prep work is covered
- A fixed price, and whether VAT is included
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Biscot questions
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
How long is the bath unusable?
One day for most baths, ready the next day. We give you timings with the quote.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
