Luton · England
Bath Re-enamelling in High Town
Bath re-enamelling in High Town without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- A roll-top that’s seen better days
Keeping it looking good
Nothing complicated is needed:
- Don’t use the bath until it has fully cured
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our bath re-enamelling in High Town
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. We regularly repair basins & shower trays, Victorian roll-tops and pressed steel baths, and common reasons people contact us are an old resurfacing that’s failing and enamel that’s lost its shine and feels rough.
You get a one-year guarantee, the same in High Town as everywhere else we work.
- Where
- High Town (LU1, LU2, LU3)
- Area hub
- Luton
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
The process
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes the best part of a day in most cases. We leave the room clean.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Open a window if you can
Ask for a price
Email us photos of the damage and one of the whole item, and tell us you are in High Town, and we will reply with a fixed price.
Advice
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- How easy the damage is to reach
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed quote
You can typically get a fixed price without us visiting. To help us price it:
- Details of any past repairs
- A coin beside the damage so we can judge size
- Natural light rather than flash
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Landlord and trade work in High Town
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Signs you need bath re-enamelling in High Town
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Send us a photo if you notice any of these:
- Stains that will not shift
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- Worn patches where water runs and sits
What your quote should include
- What prep work is covered
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- If travel is included in the price
Where we work around High Town
High Town is about 1 mile south-east of Luton, in Luton. Anywhere in LU1, we carry out the work at your property. We work in all 53 towns and villages in Luton, from the larger towns to small villages. We work right across the region, from High Town to London (about 30 miles away).
Our visits in LU1, LU2 and LU3 work the same way as everywhere else we cover. Whether you live on Oxen Road, Grove Road and Villa Road or a nearby road, a technician can come to you. We also travel to Hart Hill (1 mile east), Park Town (1 mile south-east), Biscot (1 mile north-west), Round Green (1 mile north-east) and Dallow (1 mile west). We also work in nearby towns such as Marsh Farm (3 miles north-west), Lewsey Farm (4 miles west), Lewsey Park (3 miles north-west), Lewsey (3 miles west), Tophill (3 miles north-west) and Leagrave (3 miles north-west). As one of the bigger places in Luton, High Town is somewhere we visit often.
Landmarks near High Town
Our clients here include homes close to Wardown Park, Our Lady Help of Christians Church and Painters Arms and the streets around them. Other local landmarks include Rabia Girls' and Boys' School (1.1 miles west), Church of St Matthew (under half a mile east), St Matthew's Primary School (under half a mile east) and Barnfield Skills Academy (under half a mile east). There’s a railway station in High Town itself: Luton station. Other landmarks nearby include Luton Castle (0.7 miles south) and Luton and Dunstable University Hospital (2.6 miles west). Open spaces near High Town include Warden Hill and Blow's Down.
FAQs for High Town
What areas do you cover?
All of Luton, and the rest of the UK. Travel is included in the price.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in High Town.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
What happens once I’ve sent photos?
You will get a fixed quote back. You are under no obligation.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
What else we do in High Town
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there is no premium for High Town. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- One visit for most repairs
- Rooms protected and left tidy
- CHAS and Constructionline accredited
- No extra charge for your area
Take a look at our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
