Gateshead · England
Bath re-enamelling & resurfacing in Blackhall Mill, Gateshead
Full bath re-enamelling and resurfacing in Blackhall Mill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
What a repair cannot fix
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- A bath split right through the body
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Blackhall Mill
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Bath re-enamelling in Blackhall Mill, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We are frequently asked to fix an original cast iron bath that needs restoring and wear marks under the taps, in pressed steel baths, acrylic baths and basins & shower trays.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Blackhall Mill (NE17)
- County
- Gateshead
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Blackhall Mill
What else we do in Blackhall Mill
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
FAQs for Blackhall Mill
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Can you repair something that is been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What happens after I send photos?
You’ll get a fixed quote back. You’re under no obligation.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- Whether we combine several jobs
- How much damage there is
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Photographing the damage takes a minute. Please include:
- One picture of the whole bath
- Something in shot to show the size
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
Email us photos of the damage and a wider shot of the whole item, and tell us you’re in Blackhall Mill, and we will come back with a fixed quote.
How the visit works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Where we work around Blackhall Mill
Blackhall Mill is about 4 miles north of Consett, in Gateshead. We travel to customers in Blackhall Mill, so nothing has to leave your home. Our repair technicians cover all 49 towns and villages in Gateshead. We work right across the region, from Blackhall Mill to Newcastle upon Tyne (about 9 miles away).
Our visits in NE17 are booked in the same way as anywhere else. From Riversdale, Nursery Court and Derwent Street or anywhere nearby, we can come to you. Nearby, we also work in Hamsterley (1 mile south), Low Westwood (1 mile south-west), Chopwell (1 mile north), Coalburns (3 miles north) and Whittonstall (3 miles west). We also work in nearby towns such as Gateshead (9 miles east), Blaydon (5 miles north-east), Dunston (8 miles north-east), Whickham (6 miles north-east), Ryton (5 miles north-east) and Winlaton (5 miles north-east).
Local landmarks in Blackhall Mill
Typical jobs here are in homes near Hookergate School, Chopwell Primary School and Christ Church Hamsterley, among other places. The closest station to Blackhall Mill is Prudhoe station, roughly 4.5 miles north-west of the centre. Further afield, we also cover the area around Prudhoe Castle (4.4 miles north-west) and Shotley Bridge Hospital (2.8 miles south). For a walk, there is Currock Hill.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why choose Surface Doctor in Blackhall Mill
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Work done at your home or business
Read our prices page and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
When to call us in Blackhall Mill
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
People usually call us after spotting something like this:
- Lots of chips and rust spots
- Stains that won’t shift
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
Before you book anyone
- How long the guarantee is and what it covers
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
About our accreditations · Every repair comes with a one-year guarantee.
