Gateshead · England
Bath Repair in Blackhall Mill
Our repair technicians come to Blackhall Mill for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips on the rim or sides
- Chips caused by builders
Bath repair in Blackhall Mill without replacing anything
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. We regularly repair whirlpool & spa baths, acrylic and cast iron enamel, and the jobs we see most are a failed DIY repair that’s discoloured or lifting and rust spots around the plughole.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Blackhall Mill (NE17)
- Area hub
- Gateshead
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
How to look after the repair
Once the work has cured, treat it gently:
- Check that an acrylic bath does not move when you stand in it
- Get any new chip repaired before it rusts
- Protect the bath with a towel when doing jobs nearby
- Use a soft cloth and washing-up liquid for everyday cleaning
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
How we price bath repair
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- Access to the area
- Previous DIY repairs that have to come out
- The material and finish
- The size and number of damaged areas
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Phone pictures are fine, there is no need for anything special. Just ensure we can see:
- Something in shot to show the size
- What it’s made of, if you know
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Covering Blackhall Mill
Blackhall Mill is about 4 miles north of Consett, in Gateshead. Whether you are in the middle of Blackhall Mill or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Blackhall Mill is one of 49 towns and villages in Gateshead where we work. Our jobs stretch from Blackhall Mill to Newcastle upon Tyne (9 miles away).
We work across the NE17 postcode area. From Riversdale, Nursery Court and Derwent Street or anywhere nearby, a technician can come to you. Nearby, we also work in Hamsterley (1 mile south), Low Westwood (1 mile south-west), Chopwell (1 mile north), Coalburns (3 miles north) and Whittonstall (3 miles west). Larger places within reach include Gateshead (9 miles east), Blaydon (5 miles north-east), Dunston (8 miles north-east), Whickham (6 miles north-east), Ryton (5 miles north-east) and Winlaton (5 miles north-east).
Around Blackhall Mill
Typical jobs here are in homes near Hookergate School, Chopwell Primary School and Christ Church Hamsterley, among other places. Blackhall Mill’s nearest station is Prudhoe station, roughly 4.5 miles north-west of the centre. Further afield, we also cover the area around Prudhoe Castle (4.4 miles north-west) and Shotley Bridge Hospital (2.8 miles south). The countryside around Blackhall Mill includes Currock Hill.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Places near Blackhall Mill
Other services in Blackhall Mill
Why repair rather than replace?
Swapping a damaged bath for a new one generally means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why us?
- Work done at your home or business
- Fixed prices from your pictures
- We leave the room as we found it
- Honest advice, even when it means no job
Take a look at our pricing and resurfacing vs replacement cost guide.
What a repair cannot fix
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Blackhall Mill: your questions answered
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long does the repair take to cure?
Generally the day after. We’ll tell you the exact curing time when we finish.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Do you come to Blackhall Mill?
We do. Technicians travel to Blackhall Mill from across the region, with no extra charge for travel.
What areas do you cover?
We work UK-wide, so Blackhall Mill is covered. Our prices are the same everywhere.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we are done and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the following day, the bath is ready to use.
Before we arrive
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Let us know if it has been repaired before
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
