Sandwell · England
Bath re-enamelling & resurfacing in Blackheath, Sandwell
Full bath re-enamelling and resurfacing for homes and businesses in Blackheath and across Sandwell. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An old resurfacing that is failing
Landlord and trade work in Blackheath
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams in Sandwell and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Bath re-enamelling in Blackheath, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for a period or roll-top bath worth keeping and chips and rust in more than one place, across basins & shower trays, acrylic baths and pressed steel baths.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Where
- Blackheath (B65)
- Area hub
- Sandwell
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
After the repair has cured, a few habits help it last:
- Do not leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- Do not use the bath until it has fully cured
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Covering Blackheath
Blackheath is about 1 mile south of Rowley Regis, in Sandwell. Wherever you are in the B65 postcode area, we carry out the work at your property. Blackheath is one of 33 places in Sandwell where we work. Our nearest city page is Birmingham, about 6 miles away.
Jobs in B65 are booked in the same way as anywhere else. You’ll find streets such as High Street, Station Road and Regis Road. Blackheath sits on or near the A4034 and A4100, so getting to you is simple. We also travel to Old Hill (1 mile west), Hurst Green (1 mile south-east), Rowley Regis (1 mile north), Haden Hill (1 mile south-west) and Reddal Hill (1 mile west). Within a short drive, we also cover West Bromwich (5 miles north-east), Tipton (4 miles north), Smethwick (3 miles east), Darlaston (6 miles north), Wednesbury (6 miles north) and Horseley Heath (3 miles north).
Landmarks near Blackheath
Typical jobs here are in homes near Blackheath Primary School, St Paul's and The Wharf Public House, among other places. Nearby too are Haden Hill Park (1.1 miles south-west) and Ormiston Forge Academy (0.9 miles west). The closest station to Blackheath is Rowley Regis station, roughly 0.5 miles east. Other landmarks nearby include Rowley Regis Hospital (0.5 miles north-west) and Duncan Edwards Museum (2.9 miles north-west). Open spaces near Blackheath include Portway Hill and Turners Hill.
What happens on the day
We agree an arrival time beforehand. On site, it takes the best part of a day for most jobs. The room is left tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Point us to the nearest place to park
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
What affects the price in Blackheath
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Doing more than one item at once
- The material
- Access to the area
- How much damage there is
We charge the same wherever you are, so there is no premium for Blackheath. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day. Prices start from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why book with us
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Take a look at our pricing or bath cost comparison.
Towns and villages near Blackheath
Other services in Blackheath
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Honest limits
It helps to know what we cannot do:
- A bath split right through the body
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Blackheath
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Common problems we fix in Blackheath
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Get in touch if you’ve noticed any of these:
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
Questions to ask before you book
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- Who will actually do the work
- Whether the price covers travel
FAQs for Blackheath
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What areas do you cover?
We work UK-wide. Prices do not change with location.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
About our accreditations · Every repair comes with a one-year guarantee.
