Sandwell · England
Bath re-enamelling & resurfacing in Reddal Hill, Sandwell
Fixed-price bath re-enamelling in Reddal Hill and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
When a repair isn’t the answer
We will not take on work that will not last, so here’s what a repair cannot put right:
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Bath re-enamelling in Reddal Hill without replacing anything
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. There’s no removal, plumbing or tiling involved. If you’re dealing with a bath in a colour that no longer suits and brown or grey marks that don’t clean off, we can help, whatever the material.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Reddal Hill (B64, DY2, B65)
- Area hub
- Sandwell
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Reddal Hill
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you cover Reddal Hill?
Yes, we do. Technicians travel to Reddal Hill from across the region, with no extra charge for travel.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Where we work around Reddal Hill
Reddal Hill is about 2 miles north-west of Halesowen, in Sandwell. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Reddal Hill is one of 33 places in Sandwell we cover. Our jobs stretch from Reddal Hill to Birmingham (8 miles away).
All of B64, DY2 and B65 is within our area. From Brook Lane, Haden Road and Cox's Lane or anywhere nearby, we can come to you. Reddal Hill is on the A4100, so it’s easy for us to reach. Neighbouring places we cover include Cradley Heath (1 mile south), Old Hill (1 mile east), Haden Hill (1 mile south-east), Mushroom Green (1 mile west) and Netherton (1 mile north-west). Further out, we also cover West Bromwich (5 miles north-east), Tipton (4 miles north), Oldbury (3 miles east), Smethwick (4 miles east), Darlaston (7 miles north) and Wednesbury (6 miles north-east). Reddal Hill is one of the larger places we cover in Sandwell.
Local landmarks in Reddal Hill
Typical jobs here are in homes near Hillcrest School, Haden Hill Park and Church of the Holy Trinity, among other places. Nearby too are Ormiston Forge Academy (under half a mile east), Reddal Hill Primary School (less than half a mile east) and The Wharf Public House (0.9 miles south-east). Reddal Hill’s nearest station is Old Hill station, roughly 0.8 miles south-east. Other landmarks nearby include Duncan Edwards Museum (2.5 miles north) and Merry Hill Shopping Centre (1.6 miles west). Not far away are Portway Hill and Turners Hill.
Nearby places to Reddal Hill
More services for Reddal Hill
Looking after it afterwards
Nothing complicated is needed:
- Do not let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Don’t leave a chip unrepaired
- A dripping tap should be fixed promptly
Wipe the bath dry after use where you can, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Reddal Hill. What changes the price is:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The size and number of damaged areas
- Access to the area
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Your postcode, so we can check dates
- A close-up of the damage, in focus
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Common problems we fix in Reddal Hill
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Keep an eye out for any of the following:
- A coloured bath you want in white
- A dull, rough surface that will not come clean
- Stains that will not shift
- An old resurfacing that is failing
What your quote should include
- Whether they match the colour on site
- The length of the guarantee and what it covers
- What aftercare is recommended
- Whether the price is fixed and includes VAT
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a full day, tidy-up included.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Ensure the area is dry
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
Getting a price
Send us photos of the damage and one of the whole item, with your B64 postcode, and we’ll come back with a fixed quote.
Read more
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
