Essex · England
Bath re-enamelling & resurfacing in Blake End, Essex
Bath re-enamelling across Blake End and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Worn patches where water runs and sits
Keeping it looking good
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Bath re-enamelling in Blake End, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. Whether it’s a coloured bath you want in white and brown or grey marks that don’t clean off, we can typically put it right, on pressed steel baths, acrylic baths and Victorian roll-tops alike.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Blake End (CM77)
- Region
- Essex
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Where we work around Blake End
Blake End is about 4 miles west of Braintree, in Essex. Our technicians come to customers in Blake End and the surrounding area, so you don’t need to take anything anywhere. Blake End is one of 644 places in Essex we cover. We work right across the region, from Blake End to London (about 36 miles away).
Postcode districts we cover here: CM77. Neighbouring places we cover include Watch House Green (1 mile south-west), Bannister Green (1 mile south), Felsted (2 miles south-west), Willows Green (2 miles south-east) and Causeway End (2 miles south-west). We also work in nearby towns such as Chelmsford (10 miles south), Braintree (4 miles east), Maldon (14 miles south-east), Witham (9 miles south-east), Saffron Walden (14 miles north-west) and Halstead (8 miles north-east).
Near you in Blake End
The nearest railway station is Braintree station, roughly 3.7 miles east of the centre. Well-known places in the area include Braintree Community Hospital (2.9 miles east) and Tudor House Museum (Braintree) (3.7 miles east). Green spaces nearby include Phyllis Currie Nature Reserve.
Places near Blake End
More services for Blake End
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- The colour and finish to match
- What kind of damage it is
- Doing more than one item at once
- How easy the damage is to reach
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Landlord and trade work in Blake End
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Blake End questions
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we will quote them together.
Do you work in Blake End?
We do. We send a technician to Blake End for every job, with no extra charge for travel.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
What areas do you cover?
Everywhere in the UK, Blake End included. There is no extra charge for travel.
What we are called out for in Blake End
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we’re called about are:
- An outdated colour you’d like to change
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- Wear marks under the taps
What to look for in a quote
- How to look after the finish
- What preparation is included
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Repairing versus replacing in Blake End
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing normally wins. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why choose Surface Doctor in Blake End
- Typically one visit, start to finish
- CHAS and Constructionline accredited
- No need to remove anything
- Dust sheets down, tidy finish
Take a look at our pricing and guide to resurfacing and replacement costs.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Have somewhere for us to park nearby if possible
- Ensure the room can be ventilated
- Mention if the room is upstairs or in a flat
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
