Worcestershire · England
Bath Re-enamelling for Blakeshall homes
Our repair technicians come to Blakeshall for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Bath re-enamelling at your home in Blakeshall
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. There is no removal, plumbing or tiling involved. Whether it’s wear marks under the taps and a period or roll-top bath worth keeping, we can help, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Blakeshall (DY11, DY10)
- Area hub
- Worcestershire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Blakeshall
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
You may need us if you’ve spotted:
- Lots of chips and rust spots
- An old resurfacing that is failing
- A coloured bath you want in white
- A bath that stays dull however much you clean it
Before you book anyone
- Whether the colour is mixed to match
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- How long it needs to cure
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take most of the day, tidy-up included.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
What else we do in Blakeshall
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
What a repair cannot fix
In fairness, there are a few things a repair will not fix:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Blakeshall questions
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How long does re-enamelling take?
One day for most baths, ready the following day. We give you timings with the quote.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Aftercare tips
After the repair has cured, a few habits help it last:
- Fix dripping taps quickly
- Respect the curing time we give you
- Do not let dyes or oils sit on the finish
- Never use suction bath mats
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
What you get with us
- Most jobs done in one visit
- A year’s guarantee on all work
- Everything repaired in place
- We leave the room as we found it
Take a look at our prices page or guide to resurfacing and replacement costs.
Blakeshall and nearby
Blakeshall is about 3 miles north of Kidderminster, in Worcestershire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. We work in 376 places across Worcestershire, from the larger towns to small villages. Our jobs stretch from Blakeshall to Birmingham (15 miles away).
All of DY11 and DY10 is covered. Neighbouring places we cover include Drakelow (1 mile west), Kingsford (1 mile west), Cookley (1 mile south-east), Caunsall (1 mile east) and Wolverley (1 mile south). Further out, we also cover Kidderminster (3 miles south), Bromsgrove (10 miles south-east), Droitwich Spa (12 miles south), Stourport-on-Severn (6 miles south), Bewdley (5 miles south-west) and Chawson (12 miles south).
Near you in Blakeshall
Around Blakeshall, we work in homes near Church of St Peter, Wolverley CofE Secondary School and Cookley Sebright Primary School. For rail, the closest station is Kidderminster station, about 3 miles south of the centre. A little further out are Stourton Castle (2.9 miles north-east) and Kidderminster Hospital and Treatment Centre (2.9 miles south). Open spaces near Blakeshall include Stourton Pit and Kinver Edge.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What bath re-enamelling costs
Prices start from £350. You will know the full cost before booking. We look at:
- The type of damage
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- What the surface is made of
The price reflects the work involved, not where you live. The full price is agreed before you book.
Getting a price from pictures
Two or three clear pictures are typically enough. Try to include:
- A clear, close picture of the problem area
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
