Worcestershire · England
Bath Re-enamelling for Wolverley homes
We travel to Wolverley for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- Staining under the taps and around the waste
Bath re-enamelling in Wolverley without replacing anything
If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. Common call-outs are for thin, worn enamel in places and chips and rust in more than one place, in pressed steel baths, acrylic baths and Victorian roll-tops.
Big or small, you get the same one-year guarantee.
- Area
- Wolverley (DY10, DY11)
- Area hub
- Worcestershire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
So the finish stays in good condition for years:
- Fix dripping taps quickly
- Avoid suction-cup mats
- Respect the curing time we give you
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Common problems we fix in Wolverley
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Look out for any of the following:
- A period or roll-top bath worth keeping
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- A peeling or bubbling previous coating
Questions to ask before booking
- How the room is protected while they work
- How to care for the finish
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
Should you replace it?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
- We leave the room as we found it
- Colour-matched on site
Read our pricing or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Wolverley. The price comes down to:
- What the surface is made of
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- The colour and finish to match
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
Before you send pictures, a few simple things make all the difference:
- A clear, close picture of the problem area
- Any details about the material
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say immediately whether it can be repaired.
What a repair can’t fix
Some jobs aren’t right for a repair, for example:
- Steel that has corroded right through
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Open a window if you can
- Let us know if it has been repaired before
- Let us know about parking or access
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
Your questions about bath re-enamelling in Wolverley
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you cover the whole of Worcestershire?
We work UK-wide, so Wolverley is covered. Our prices are the same everywhere.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Also near Wolverley
Also in Wolverley
Landlords, agents and businesses in Wolverley
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Our work in Wolverley
Wolverley is about 2 miles north of Kidderminster, in Worcestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover 376 places across Worcestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 16 miles away.
We cover every part of DY10 and DY11 and the streets around it. Whether you live on Wolverley Road, Lea Lane and Brown Westhead Park or a nearby road, a technician can come to you. Main roads around Wolverley include the B4189, so getting to you is simple. We also cover the places around Wolverley: Fairfield (1 mile west), Broadwaters (1 mile south-east), Cookley (1 mile north-east), Franche (1 mile south-west) and Blakeshall (1 mile north). Larger places within reach include Worcester (15 miles south), Redditch (15 miles south-east), Bromsgrove (10 miles south-east), Droitwich Spa (11 miles south), Stourport-on-Severn (5 miles south) and Bewdley (4 miles south-west).
Local landmarks in Wolverley
In Wolverley, that means homes near Church of St John the Baptist, Wolverley CofE Secondary School and Heathfield School, among other places. Also close by are Wolverley Sebright Primary Academy (under half a mile west) and The Queens Head pub (within half a mile north-west). The nearest railway station is Kidderminster station, about 1.8 miles south. Nearby you’ll also find Caldwall Castle (1.8 miles south) and Kidderminster Hospital and Treatment Centre (1.8 miles south). For a walk, there is Axborough Hill and Wilden Marsh.
About our accreditations · Every repair comes with a one-year guarantee.
