Nottinghamshire · England
Bath re-enamelling & resurfacing in Bleasby, Nottinghamshire
Bath re-enamelling across Bleasby and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A coloured bath you want in white
- Several chips and rust patches
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Previous DIY repairs that have to come out
- How much damage there is
- How hard the colour is to match
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed price
Good photos mean an accurate price. Here’s what helps:
- One sharp close-up of the damage
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Details of any past repairs
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Bath re-enamelling in Bleasby without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We work on Victorian roll-tops, cast iron baths and basins & shower trays, and common reasons people contact us are stains that won’t shift and several chips and rust patches.
Every repair comes with a one-year guarantee, wherever you are in Nottinghamshire.
- Area
- Bleasby (NG14, NG25)
- County
- Nottinghamshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Bleasby
Bleasby is about 6 miles south-west of Newark-on-Trent, in Nottinghamshire. We travel to customers in Bleasby, so you do not need to take anything anywhere. Bleasby is one of 329 towns and villages in Nottinghamshire where we work. You can also see our page for Birmingham, about 56 miles away.
We work across NG14 and NG25. Whether you live on Main Street, Station Road and Hawthorn Close or a nearby road, a technician can come to you. Other places close to Bleasby include Goverton (1 mile west), Morton (1 mile north-east), Thurgarton (1 mile west), Fiskerton (2 miles north-east) and Brinkley (2 miles north). Larger places within reach include Mansfield (13 miles north-west), Beeston (15 miles south-west), Carlton (8 miles south-west), Sutton in Ashfield (15 miles north-west), Hucknall (11 miles west) and Newark-on-Trent (6 miles north-east).
What’s near Bleasby
Locally, our jobs take us to homes close to Southwell Minster School, Bleasby Church of England Primary School and St Mary's Church and the streets around them. Bleasby has its own railway station: Bleasby station. A little further out are Newark Hospital (5.6 miles east) and Lowdham Motte (3.7 miles south-west).
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Getting a price
Most clients in Bleasby get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Signs you need bath re-enamelling in Bleasby
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a picture:
- A roll-top that’s seen better days
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether there are any call-out or travel charges
- How the colour is matched
- Whether the price is fixed and includes VAT
- What happens if they find more damage
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Bleasby
- Free fixed quotes from pictures
- We leave the room as we found it
- We will tell you if it’s not worth repairing
- Most jobs done in one visit
Read our full price list and guide to resurfacing and replacement costs.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Bleasby questions
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Do you cover the entire of Nottinghamshire?
The entire UK, including all of Nottinghamshire. Just include your postcode and we will confirm dates.
What happens next?
We review the pictures and send a fixed quote and the next dates we have.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Places near Bleasby
Also in Bleasby
About our accreditations · Every repair comes with a one-year guarantee.
