Nottinghamshire · England

Bath Re-enamelling in Hucknall

Full bath re-enamelling and resurfacing for homes and businesses in Hucknall and across Nottinghamshire. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Hucknall?

How we price bath re-enamelling

Resurfacing from £350. We price every job individually, from your pictures. What matters most is:

  • The type of damage
  • Doing more than one item at once
  • Access to the area
  • Previous DIY repairs that have to come out

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed price

A couple of clear pictures is all it takes. Try to include:

  • One picture of the whole bath
  • One sharp close-up of the damage
  • Any details about the material
  • Whether it’s been repaired or coated before

For a price in Hucknall, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Bath re-enamelling in Hucknall, done in place

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We’re often asked to fix chips and rust in more than one place and worn patches where water runs and sits, in basins & shower trays, Victorian roll-tops and pressed steel baths.

You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Location
Hucknall (NG15)
Area hub
Nottinghamshire
Warranty
A year, on every repair
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Should you replace it?

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why book with us

  • A year’s guarantee on all work
  • Everything repaired in place
  • Rooms protected and left tidy
  • CHAS and Constructionline accredited

Read our full price list and guide to resurfacing and replacement costs.

What we cannot put right

Not everything can be repaired, and we will tell you before we start. We cannot fix:

  • Acrylic that moves when you stand in it
  • Leaks from fittings rather than the bath
  • A cast iron or steel bath that’s cracked right through

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Stick to gentle, non-abrasive cleaners
  • Keep toiletries on a shelf rather than in the bath
  • Wash away dyes and oils after use
  • A dripping tap should be fixed promptly

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Nottinghamshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Landlords, letting agents and housing providers in Hucknall use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

Hucknall and the surrounding area

Hucknall is about 5 miles north of Nottingham, in Nottinghamshire. From the centre of Hucknall to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 329 places in Nottinghamshire. We work right across the region, from Hucknall to Birmingham (about 48 miles away).

Here we cover the NG15 postcode area. Local streets include High Street, Station Road and Barbara Square. You will find Hucknall on the A611 and B6009, which makes it straightforward to reach. Other places close to Hucknall include Westville (1 mile south-west), Linby (1 mile north), Greasley (3 miles west), Newstead (3 miles north) and Watnall (3 miles south-west). Within a short drive, we also cover Mansfield (8 miles north), Beeston (8 miles south), Carlton (6 miles south-east), Sutton in Ashfield (7 miles north), West Bridgford (8 miles south-east) and Mansfield Woodhouse (9 miles north). Hucknall is one of the larger places we cover in Nottinghamshire.

Around Hucknall

Locally, our jobs take us to homes close to Holgate Academy, Holgate Primary and Nursery School and Hucknall Sixth Form Centre and the streets around them. Other local landmarks include Church of St. Mary Magdalene (0.5 miles north), The Pilgrim Oak pub (under half a mile north-east) and Bestwood Country Park (1.7 miles south-east). Hucknall’s nearest station is Hucknall station, roughly 0.6 miles north-east of the centre. Other landmarks nearby include Greasley Castle (2.7 miles west) and South Nottinghamshire Hussars Museum (1.9 miles south).

Map of Hucknall © OpenStreetMap contributors

What happens on the day

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can normally be used the day after.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Plan for the room to be out of bounds to pets and children
  • Have somewhere for us to park nearby if possible

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.

Get a fixed quote

Related advice

Hucknall questions

How do I get a price for bath re-enamelling in Hucknall?

Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Does re-enamelling smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before and we’ll plan for it.

Do you need to take the bath out?

No. We resurface it in place, so nothing else is disturbed.

What if the damage is worse than the photos show?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Can you repair several things at once?

Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.

What do you need from me?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Different materials, different repairs

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.