Hampshire · England
Bath Re-enamelling for Blissford homes
Bath re-enamelling in Blissford without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A coating lifting around the plughole
Bath re-enamelling at your home in Blissford
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We regularly repair cast iron baths, pressed steel baths and basins & shower trays, and common reasons people get in touch are a roll-top that’s seen better days and a bath that stays dull however much you clean it.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Blissford (SP6)
- Region
- Hampshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Blissford
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Send the address, pictures and access details.
Questions from Blissford
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Do the materials smell?
Expect a mild smell while we’re working.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- The size and number of damaged areas
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- What it’s made of, if you know
If you’re in Blissford and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Blissford and the surrounding area
Blissford is about 6 miles north-east of Verwood, in Hampshire. Jobs in Blissford are booked in like any other job: a fixed price from your photos, then a visit to do the work. Blissford is one of 683 places in Hampshire we cover.
Our visits in SP6 are booked in the same way as anywhere else. We regularly work on streets such as Blissford Hill, Blissford Cross and Abbots Well Road. Other places close to Blissford include Frogham (1 mile south), Hyde (1 mile south-west), Hungerford (1 mile south-west), Stuckton (1 mile west) and Criddlestyle (1 mile north-west). We also work in nearby towns such as Totton (11 miles east), Lymington (14 miles south-east), Romsey (13 miles north-east), New Milton (12 miles south), Ringwood (5 miles south) and Barton on Sea (13 miles south).
Local landmarks in Blissford
Around Blissford, we work in homes near The Burgate School and Sixth Form, The Fighting Cocks pub and Hyde Church of England Primary School and the streets around them. Further afield, we also cover the area around Fordingbridge Doll Museum (1.6 miles west) and Godshill Castle Hill (1.8 miles north). For a walk, there’s Blashford Lakes and Linbrook Lake.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
When to call us in Blissford
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
It’s worth getting a quote if you see:
- Wear marks under the taps
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- A bath in a colour that no longer suits
What to look for in a quote
- Whether the colour is mixed to match
- If travel is included in the price
- What happens if they find more damage
- When it can be used again
Aftercare tips
So the finish stays in good condition:
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which typically takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
Getting a price
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll say right away whether it can be repaired.
Advice
What we can’t put right
We’d rather lose a job than do one that will not last, so these are the limits:
- Plumbing leaks, which need a plumber
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Also near Blissford
Also in Blissford
About our accreditations · Every repair comes with a one-year guarantee.
