Warwickshire · England
Bath Re-enamelling for Blythe End homes
Bath re-enamelling in and around Blythe End: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that will not shift
- Several chips and rust patches
When a repair is not the answer
Before you book, it’s worth knowing the limits too:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Bath re-enamelling in Blythe End, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on Victorian roll-tops, cast iron baths and pressed steel baths, and people most often call us about a dull, rough surface that won’t come clean and staining under the taps and around the waste.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Blythe End (B46)
- County
- Warwickshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Blythe End: your questions answered
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item with your B46 postcode.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you quote from pictures?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Repairing versus replacing in Blythe End
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Blythe End. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Blythe End
- We leave the room as we found it
- Nothing taken out or refitted
- Technicians who travel to you, UK-wide
- Every repair guaranteed for a year
Take a look at our prices page or bath cost comparison.
What we’re called out for in Blythe End
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The most common problems we’re called about are:
- An original cast iron bath that needs restoring
- Several chips and rust patches
- A coating lifting around the plughole
- Thin, worn enamel in places
Comparing quotes
- How the colour is matched
- What aftercare is recommended
- What happens if they find more damage
- Whether the price covers travel
Our work in Blythe End
Blythe End is about 3 miles north-east of Fordbridge, in Warwickshire. Whether you are in the middle of Blythe End or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 324 towns and villages across Warwickshire, from the larger towns to small villages. We work right across the region, from Blythe End to Birmingham (about 9 miles away).
Every address in B46 is within our area, from the main roads to the quietest streets. Nearby, we also work in Blyth End (1 mile north-east), Hoggrill's End (1 mile north-east), Shustoke (1 mile east), Nether Whitacre (1 mile north-east) and Whitacre Heath (1 mile north). Further out, we also cover Nuneaton (9 miles east), Bedworth (9 miles east), Kenilworth (12 miles south-east), Fordbridge (3 miles south-west), Atherstone (7 miles north-east) and Castle Vale (4 miles west).
Near you in Blythe End
We visit homes around Shustoke CofE Primary School, The Coleshill School and Church of St Peter and St Paul, among other places. For rail, the closest station is Coleshill Parkway station, about 1 mile west of the centre. A little further out are Brooklands Hospital (3.8 miles south-west) and Maxstoke Castle (1.1 miles south-east). Not far away are Shard End Lake and Ladywalk Reserve.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Blythe End. The price depends on:
- How easy the damage is to reach
- The material
- Any earlier repairs that need removing first
- Whether we combine several jobs
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- A photo taken from further back
- Natural light rather than flash
- Something in shot to show the size
- Details of any past repairs
To get a price, send two or three photos through our quote form or call us. We’ll say straight away if a repair is the right fix.
Places near Blythe End
What else we do in Blythe End
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
