Warwickshire · England
Bath Re-enamelling for Atherstone homes
Full bath re-enamelling and resurfacing at your home in Atherstone, with a one-year guarantee on every repair.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Atherstone
We do not move the bath, so the taps, tiles and plumbing are not touched. It usually takes one visit, and can be used again the next day. We regularly repair basins & shower trays, Victorian roll-tops and acrylic baths, and people most frequently call us about worn patches where water runs and sits and an outdated colour you’d like to change.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Atherstone (CV9)
- Region
- Warwickshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
It helps to know what we can’t do:
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we will say what we think.
Materials we work on in Atherstone
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Repairing versus replacing in Atherstone
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Atherstone customers choose us
- We will tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- One price list for the entire UK
Read our pricing or bath cost comparison.
The process
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take most of the day, including clearing up.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
- Open a window if you can
Getting a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
Your questions about bath re-enamelling in Atherstone
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
How much does bath re-enamelling cost in Atherstone?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Signs you need bath re-enamelling in Atherstone
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Look out for these signs:
- A dull, rough surface that will not come clean
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
- An old resurfacing that is failing
What to look for in a quote
- How the colour is matched
- How the room is protected while they work
- Whether there are any call-out or travel charges
- What preparation is included
Towns and villages near Atherstone
What else we do in Atherstone
Landlord and trade work in Atherstone
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Our work in Atherstone
Atherstone is about 5 miles north-west of Nuneaton, in Warwickshire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Atherstone is one of 324 towns and villages in Warwickshire we cover. We work right across the region, from Atherstone to Birmingham (about 16 miles away).
All of CV9 is covered. Streets in the area include Market Street, Denham Court and Ratcliffe Street, all of which we cover. Atherstone is on the A5 and B4116, so it’s easy for us to reach. Neighbouring places we cover include Mancetter (1 mile south-east), Witherley (1 mile east), Whittington (1 mile north-west), Merevale (1 mile west) and Pinwall (1 mile north). Within a short drive, we also cover Nuneaton (5 miles south-east), Bedworth (7 miles south), Fordbridge (11 miles south-west), Castle Vale (11 miles west), Chilvers Coton (5 miles south-east) and Camp Hill (4 miles south-east). Atherstone is one of the larger places we cover in Warwickshire.
Landmarks near Atherstone
Typical jobs here are in homes near The White Horse Public House, Outwoods Primary School and The Queen Elizabeth Academy. There’s a railway station in Atherstone itself: Atherstone station. A little further out are Atherstone Heritage Centre (less than half a mile west) and George Eliot Hospital (5.4 miles south-east).
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
