Bradford · England
Bath re-enamelling & resurfacing in Bocking, Bradford
Fixed-price bath re-enamelling in Bocking and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
How we handle bath re-enamelling in Bocking
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for an outdated colour you’d like to change and several chips and rust patches, across acrylic baths, pressed steel baths and Victorian roll-tops.
Every repair comes with a one-year guarantee, wherever you are in Bradford.
- Area
- Bocking (BD22, BD21)
- County
- Bradford
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Bocking
Also in Bocking
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Access to the area
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
The price reflects the work involved, not your postcode. You will see the full price before you book, with no extras added later.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Details of any past repairs
- A coin or ruler next to the damage for scale
To get a price, send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Where we work around Bocking
Bocking is about 1 mile north-east of Haworth, in Bradford. Clients in Bocking get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 140 places across Bradford, from the larger towns to small villages. Our nearest city page is Leeds, about 16 miles away.
We work across the BD22 and BD21 postcode area. Jobs here include addresses on Halifax Road, Bingley Road and Haworth Road and the roads around them. Close by, we cover Bogthorn (1 mile west), Damems (1 mile north), Hainworth (1 mile north-east), Cackleshaw (1 mile south-west) and Flappit Spring (1 mile south). Larger places within reach include Bradford (7 miles south-east), Bingley (4 miles east), Shipley (6 miles east), Baildon (7 miles east), Great Horton (7 miles south-east) and Upper Green (7 miles south-east).
Around Bocking
Typical jobs here are in homes near Church of St James, Holden Park and Oakbank School. Also close by are Mill Hey Brew House (0.9 miles south-west) and Lees Primary School (under half a mile south-west). The closest station to Bocking is Keighley station, about 2.4 miles north-east of the centre. A little further out are Haworth (0.8 miles south-west) and Airedale General Hospital (4.4 miles north). Green spaces nearby include Redcar Tarn.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Questions from Bocking
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can I get a quote without a visit?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Repair or replace in Bocking?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- We come to you, anywhere in the UK
- A fixed quote before booking
- Colour-matched on site
- Everything repaired in place
Read our prices page and bath cost comparison.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
The process
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and clear up. Plan for most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
