Bradford · England
Bath Re-enamelling in Flappit Spring
Fixed-price bath re-enamelling in Flappit Spring and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- Lots of chips and rust spots
Bath re-enamelling in Flappit Spring without replacing anything
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with wear marks under the taps and an original cast iron bath that needs restoring, we can typically put it right, on acrylic baths, basins & shower trays and cast iron baths alike.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Area
- Flappit Spring (BD21)
- Region
- Bradford
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Flappit Spring and the surrounding area
Flappit Spring is about 3 miles south of Keighley, in Bradford. From the centre of Flappit Spring to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 140 towns and villages in Bradford. You can also see our page for Leeds, about 15 miles away.
Jobs in BD21 are booked in the same way as anywhere else. We regularly work on streets such as Haworth Road and Halifax Road. Neighbouring places we cover include Cackleshaw (1 mile west), Bocking (1 mile north), Haworth (1 mile west), Bogthorn (1 mile north-west) and Hainworth (1 mile north). We also work in nearby towns such as Bradford (7 miles east), Keighley (3 miles north), Bingley (4 miles north-east), Shipley (6 miles east), Baildon (7 miles east) and Great Horton (6 miles south-east).
Around Flappit Spring
In Flappit Spring, that means homes near Church of St James, Holden Park and Parkside School. The closest station to Flappit Spring is Keighley station, roughly 3 miles north of the centre. Well-known places in the area include Haworth (0.9 miles north-west) and Ingrow Loco Museum (2 miles north). The countryside around Flappit Spring includes Redcar Tarn.
Common problems we fix in Flappit Spring
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Most people contact us after spotting one of these:
- A bath that stays dull however much you clean it
- Several chips and rust patches
- Wear marks under the taps
- A roll-top that is seen better days
What your quote should include
- Whether the price is fixed and includes VAT
- Aftercare advice
- Whether cleaning and preparation are in the price
- When it can be used again
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- The material and finish
- Access to the area
- Whether we combine several jobs
- Any earlier repairs that need removing first
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- One sharp close-up of the damage
- Details of any past repairs
- A coin beside the damage so we can judge size
- What it’s made of, if you know
Upload photos of the damage and one of the entire item, and tell us you’re in Flappit Spring, and we will reply with a fixed quote.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Also in Flappit Spring
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
Your questions about bath re-enamelling in Flappit Spring
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Are there extra charges for Flappit Spring?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Repair or replace in Flappit Spring?
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- We come to you, anywhere in the UK
- One-year guarantee on every repair
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or resurfacing vs replacement cost guide.
Work for landlords and builders
For anyone letting property in or around Flappit Spring, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
About our accreditations · Every repair comes with a one-year guarantee.
