Halton · England
Bath Re-enamelling in Bold Heath
Full bath re-enamelling and resurfacing in Bold Heath, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- A coating lifting around the plughole
Bath re-enamelling at your home in Bold Heath
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with stains that won’t shift and an original cast iron bath that needs restoring, we can help, on pressed steel baths, cast iron baths and acrylic baths alike.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Bold Heath (WA8)
- Region
- Halton
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Bold Heath
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
The most common problems we’re called about are:
- Worn patches where water runs and sits
- Several chips and rust patches
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
What your quote should include
- What aftercare is recommended
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- When it can be used again
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Honest limits
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
What affects the price in Bold Heath
Resurfacing from £350. We price every job individually. What matters most is:
- How hard the colour is to match
- Doing more than one item at once
- The material
- How many areas need work
A repair is priced on what needs doing, not your postcode. You will see the full price before booking.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- A picture taken from further back
If you are in Bold Heath and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Bold Heath questions
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How long is the bath unusable?
One day for most baths, ready the following day. We give you timings with the quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you come to Bold Heath?
We do. Repair technicians travel to Bold Heath from across the region, and the price is the same as everywhere else.
How do I get a price for bath re-enamelling in Bold Heath?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How it works
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It typically takes most of the day, and you can get on with other things while we are there.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
- Let us know about parking or access
Getting a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Should you replace it?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the next day. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- A fixed quote before booking
- Colours mixed by hand to suit your surface
Read our prices page or guide to resurfacing and replacement costs.
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams in Halton and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Towns and villages near Bold Heath
Other services in Bold Heath
Bold Heath and nearby
Bold Heath is about 2 miles north-east of Widnes, in Halton. Clients in Bold Heath get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Bold Heath is one of 30 places in Halton where we work. Our nearest city page is Liverpool, about 9 miles away.
We work across the WA8 postcode area. From Clock Face Road, School Lane and Warrington Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Farnworth (1 mile south-west), Barrow's Green (2 miles south), Widnes (2 miles south-west), Cronton (2 miles west) and Chestnut Lodge (3 miles south-west). We also work in nearby towns such as Runcorn (5 miles south), Murdishaw (5 miles south), Norton (5 miles south), Halton Lodge (5 miles south), Grange (5 miles south) and Windmill Hill (4 miles south).
Landmarks near Bold Heath
We visit homes around The Griffin pub, Great Sankey High School and Moorfield Primary School. For rail, the closest station is Widnes station, about 1.8 miles south-west of the centre. Nearby you’ll also find Halton Castle (4.5 miles south) and Widnes Rugby League Museum (1.4 miles south-west).
About our accreditations · Every repair comes with a one-year guarantee.
