Derbyshire · England
Bath re-enamelling & resurfacing in Bolsover Woodhouse, Derbyshire
We travel to Bolsover Woodhouse for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
How it works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Advice
Bath re-enamelling in Bolsover Woodhouse, done in place
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. Common call-outs are for a peeling or bubbling previous coating and a coloured bath you want in white, on pressed steel baths, cast iron baths and basins & shower trays.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Location
- Bolsover Woodhouse (S44)
- Region
- Derbyshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Bolsover Woodhouse
Other services in Bolsover Woodhouse
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- One visit for most repairs
- Every repair guaranteed for a year
- We leave the room as we found it
- Nothing taken out or refitted
Read our pricing and bath cost comparison.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- Any earlier repairs that need removing first
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Before you send pictures, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- Any details about the material
- One sharp close-up of the damage
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Aftercare tips
To keep it looking its best:
- Keep suction mats out of the bath
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we can’t put right
Some jobs aren’t right for a repair, including:
- Steel that has corroded right through
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Our work in Bolsover Woodhouse
Bolsover Woodhouse is about 1 mile north-west of Bolsover, in Derbyshire. We travel to homes and businesses in Bolsover Woodhouse and the surrounding area, so you don’t need to take anything anywhere. Bolsover Woodhouse is one of 532 places in Derbyshire we cover. We work right across the region, from Bolsover Woodhouse to Leeds (40 miles away).
Postcode districts we cover here: S44. Other places close to Bolsover Woodhouse include Bentinck (1 mile north), Markham Vale (1 mile west), New Bolsover model village (1 mile south), Duckmanton (1 mile west) and Long Duckmanton (1 mile west). Further out, we also cover Chesterfield (5 miles west), Dronfield (8 miles north-west), Ripley (14 miles south), Matlock (12 miles south-west), Clay Cross (7 miles south-west) and South Normanton (10 miles south).
Landmarks near Bolsover Woodhouse
Our clients here include homes close to Poolsbrook Country Park, Brockley Primary School and The Castle Arms. The closest station to Bolsover Woodhouse is Creswell station, about 4 miles east of the centre. Further afield, we also cover the area around Bolsover Hospital (1.5 miles south-east) and Bolsover Castle (1.1 miles south-east).
FAQs for Bolsover Woodhouse
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you fix a peeling bath coating?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
