Derbyshire · England
Bath Re-enamelling for New Bolsover model village homes
Bath re-enamelling in New Bolsover model village without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- A peeling or bubbling previous coating
Bath re-enamelling in New Bolsover model village, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s a bath that stays dull however much you clean it and an old resurfacing that’s failing, we can typically put it right.
Every repair comes with our one-year guarantee, wherever you are in Derbyshire.
- Location
- New Bolsover model village (S44)
- Region
- Derbyshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
What we can’t put right
A repair is not right for every job, for example:
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in New Bolsover model village
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Looking after it afterwards
How the surface is treated afterwards matters:
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we are done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
How to get a price
To get a price, send a couple of pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.
Advice
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before booking. We look at:
- The type of damage
- What the surface is made of
- The size and number of damaged areas
- The colour and finish to match
Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- What it’s made of, if you know
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Where you are, by postcode
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Questions from New Bolsover model village
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Which areas do you work in?
All of Derbyshire, and the rest of the UK. Travel is included in the price.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
New Bolsover model village and nearby
New Bolsover model village is about 1 mile west of Bolsover, in Derbyshire. Jobs in New Bolsover model village are booked in like any other job: a fixed quote from pictures, then a visit to do the work. New Bolsover model village is one of 532 towns and villages in Derbyshire we cover. Our jobs stretch from New Bolsover model village to Manchester (41 miles away).
Every address in S44 is covered, from the main roads to the quietest streets. Local streets include Main Street, Villas Road and Chapel Road, and we cover them all. Other places close to New Bolsover model village include Carr Vale (1 mile south), Bolsover Woodhouse (1 mile north), Rylah (1 mile south), Markham Vale (2 miles north-west) and Long Duckmanton (2 miles north-west). Within a short drive, we also cover Chesterfield (6 miles west), Belper (15 miles south-west), Heanor (15 miles south), Dronfield (9 miles north-west), Ripley (13 miles south) and Staveley (3 miles north-west).
Near you in New Bolsover model village
In New Bolsover model village, that means homes near The Bolsover School, The Bolsover School and Sportsman pub. Also close by are Church of St Mary and St Lawrence (0.5 miles east) and New Bolsover Primary and Nursery School (within half a mile east). The closest station to New Bolsover model village is Langwith - Whaley Thorns station, roughly 3.9 miles east of the centre. A little further out are Stainsby Mill (3.2 miles south) and Bolsover Castle (within half a mile north-east).
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Rooms protected and left tidy
- Colour-matched on site
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and guide to resurfacing and replacement costs.
Towns and villages near New Bolsover model village
Also in New Bolsover model village
Work for landlords and builders
Landlords, letting agents and housing providers in New Bolsover model village use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
