Gloucestershire · England
Bath re-enamelling & resurfacing in Bourton-on-the-Water, Gloucestershire
Fixed-price bath re-enamelling in Bourton-on-the-Water and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Bourton-on-the-Water
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Typical jobs include a bath in a colour that no longer suits and wear marks under the taps, on acrylic baths, pressed steel baths and basins & shower trays.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- Bourton-on-the-Water (GL54)
- County
- Gloucestershire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Common problems we fix in Bourton-on-the-Water
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Signs it’s time to call us include:
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Several chips and rust patches
- Worn patches where water runs and sits
Before booking anyone
- Whether the price is fixed and includes VAT
- How soon you can use it again
- Whether cleaning and preparation are in the price
- If travel is included in the price
Also near Bourton-on-the-Water
Other services in Bourton-on-the-Water
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Common questions in Bourton-on-the-Water
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Are there extra charges for Bourton-on-the-Water?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
What happens after I send photos?
We review the pictures and send a fixed quote.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Do you cover the entire of Gloucestershire?
The entire UK, including all of Gloucestershire. Just include your postcode and we’ll confirm dates.
Landlords, agents and businesses in Bourton-on-the-Water
We carry out planned and one-off repairs for housing associations and facilities teams in Gloucestershire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Where we work around Bourton-on-the-Water
Bourton-on-the-Water is about 11 miles north-west of Carterton, in Gloucestershire. Customers in Bourton-on-the-Water get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. We work in 470 places in Gloucestershire. Our nearest city page is Birmingham, about 41 miles away.
Our repair technicians cover all of the GL54 postcode area and the streets around it. Streets in the area include Station Road, High Street and Piece Hedge. Nearby, we also work in Lower Slaughter (1 mile north), Little Rissington (2 miles south-east), Upper Rissington (3 miles east), Great Rissington (3 miles south-east) and Lower Swell (3 miles north). Further out, we also cover Cheltenham (14 miles west), St Paul's (14 miles west), Cirencester (15 miles south-west), Lansdown (14 miles west), Bishop's Cleeve (14 miles west) and Fairview (13 miles west).
Local landmarks in Bourton-on-the-Water
Locally, our jobs take us to homes close to The Cotswold Academy, The Old Manse Hotel and Church of St Lawrence. Further afield, we also cover the area around Cotswold Motoring Museum (within half a mile south-west) and Moore Cottage Hospital (less than half a mile north-east).
What we do, step by step
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow most of the day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Advice
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why Bourton-on-the-Water clients choose us
- Same prices wherever you are
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
Read our full price list and resurfacing vs replacement cost guide.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Repair dripping taps early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
What a repair can’t fix
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
