Vale of Glamorgan · Wales
Bath Re-enamelling for Boverton homes
Full bath re-enamelling and resurfacing in Boverton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Bath re-enamelling in Boverton, done in place
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We’re often asked to fix staining under the taps and around the waste and a dull, rough surface that won’t come clean, across pressed steel baths, cast iron baths and basins & shower trays.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Boverton (CF61, CF62)
- Region
- Vale of Glamorgan
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why book with us
- One price list for the whole UK
- Honest advice, even when it means no job
- Generally one visit, start to finish
- One-year guarantee on every repair
Read our prices page or bath cost comparison.
Honest limits
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- A bath that’s rusted through
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Do you need bath re-enamelling in Boverton?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Get in touch if you’ve noticed any of these:
- An outdated colour you’d like to change
- An old resurfacing that’s failing
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
Comparing quotes
- Whether the price is fixed and includes VAT
- If travel is included in the price
- How your room will be protected
- How long it needs to cure
Towns and villages near Boverton
What else we do in Boverton
Aftercare tips
To keep it looking its best:
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The type of damage
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- A clear, close picture of the problem area
- The material, if you know it
- A coin beside the damage so we can judge size
- A picture taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
About Boverton
Boverton (Welsh: Trebefered) is about 8 miles south-east of Bridgend, in the Vale of Glamorgan. Jobs in Boverton are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover all 67 towns and villages in the Vale of Glamorgan, from the larger towns to small villages.
Postcode districts we cover here: CF61 and CF62. From Kingfisher Square, Woodpecker Square and Leigh Close or anywhere nearby, a technician can come to you. If you’re just outside Boverton, we cover Llantwit Major (1 mile west), Llanmaes (1 mile north), West End Town (1 mile west), Eglwys-Brewis (2 miles east) and St Athan (2 miles east). Within a short drive, we also cover Barry (9 miles east), Penarth (12 miles east), Gibbonsdown (9 miles east), Cadoxton (9 miles east), Dinas Powys (11 miles east) and Cowbridge (4 miles north).
What’s near Boverton
In Boverton, that means homes near The Boverton Castle pub, Church Of St Cattwg and Ysgol y Ddraig. The nearest railway station is Llantwit Major station, roughly 0.7 miles west of the centre. A little further out are South Wales Aviation Museum (1.4 miles north-east) and Bedford Castle (within half a mile north). Not far away are Ash Tip and Walls Pool.
Boverton questions
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
How do I get a price for bath re-enamelling in Boverton?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your CF61 postcode.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send pictures.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
How the visit works
The work is clean and fairly quiet. We protect the area first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
How to get a price
Most clients in Boverton get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
