Aberdeenshire · Scotland

Bath Re-enamelling for Boyndie homes

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Boyndie. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Boyndie

How we handle bath re-enamelling in Boyndie

A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for stains that won’t shift and an old resurfacing that’s failing, in cast iron baths, pressed steel baths and Victorian roll-tops.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.

Where
Boyndie (AB45)
Region
Aberdeenshire
Guarantee
One year on every repair
Price
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Common questions in Boyndie

Can I get a quote without a visit?

In nearly every case. If photos don’t show enough, we will ask for another angle.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

When can you do it?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

What happens if you find more damage?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

How much does bath re-enamelling cost in Boyndie?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How long is the bath unusable?

Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

Keeping it looking good

How the surface is treated afterwards matters:

  • Keep toiletries on a shelf rather than in the bath
  • Rinse off hair dye, oils and bath bombs straight away
  • A dripping tap should be fixed promptly
  • A quick wipe after use keeps limescale away

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further.

The process

Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow most of the day.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Tell us about any previous repairs or coatings
  • Ensure the room can be ventilated
  • Let us know which floor the room is on

Ask for a price

Most customers in Boyndie get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed quote

Advice

What we can’t put right

A few problems are outside what a surface repair can do:

  • Anything hidden under an old coating, until we remove it
  • A poorly supported acrylic bath, until it’s firmed up
  • Holes rusted through the metal

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

Covering Boyndie

Boyndie is about 13 miles east of Buckie, in Aberdeenshire. Across the AB45 area, a technician comes to you. We work in all 161 towns and villages across Aberdeenshire, from the larger towns to small villages.

All of AB45 is covered. From Deveron Avenue, Eden Court and Gaveny Court or a nearby road, a technician can come to you. Nearby, we also work in Ladysbridge (1 mile east), Whitehills (1 mile north-east), Banff (3 miles east), Portsoy (4 miles north-west) and Macduff (4 miles east). Within a short drive, we also cover Turriff (10 miles south-east), Aberchirder (7 miles south) and Gardenstown (10 miles east). Some remote addresses need extra planning, so call us to arrange it.

Around Boyndie

Typical jobs here are in homes near Parish Church, among other places. Nearby you will also find Ladysbridge Hospital (0.6 miles east) and Duff House (2.5 miles east). Not far away are Durn Hill.

Map of Boyndie © OpenStreetMap contributors

What we are called out for in Boyndie

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

The things customers generally mention when they call include:

  • Thin, worn enamel in places
  • A bath in a colour that no longer suits
  • An original cast iron bath that needs restoring
  • Lots of chips and rust spots

Comparing quotes

  • Whether they match the colour on site
  • How to care for the finish
  • How long the guarantee is and what it covers
  • How changes to the job are handled

How to compare quotes

Should you replace it?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why Boyndie clients choose us

  • One-year guarantee on every repair
  • Everything repaired in place
  • Most jobs done in one visit
  • Honest advice, even when it means no job

Read our prices page and guide to resurfacing and replacement costs.

Prices and what affects them

Prices start from £350. We don’t charge extra for travel to Boyndie. The price comes down to:

  • Whether old repairs or coatings need taking off
  • How many items we do on one visit
  • Unusual colours or finishes
  • How much damage there is

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Getting a price from pictures

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before
  • The material, if you know it
  • A wider photo showing the entire bath

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.