North Lincolnshire · England
Bath re-enamelling & resurfacing in Bracon, North Lincolnshire
Our technicians come to Bracon for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A roll-top that is seen better days
Bath re-enamelling in Bracon without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our repair technicians work on cast iron baths, Victorian roll-tops and acrylic baths, and people most often call us about wear marks under the taps and lots of chips and rust spots.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Bracon (DN9)
- Region
- North Lincolnshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- How many items we do on one visit
- The material
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
Two or three clear pictures are typically enough. It helps if you send:
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- Something in shot to show the size
- Any details about the material
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About Bracon
Bracon is about 6 miles west of Bottesford, in North Lincolnshire. We travel to homes and businesses in Bracon and nearby villages, so there’s no workshop to go to. We work in 90 places in North Lincolnshire. Our jobs stretch from Bracon to Leeds (about 35 miles away).
Our visits in DN9 are booked in the same way as anywhere else. From High Street, The Furlong and Church View Close or a nearby road, we can come to you. With the A161 close by, Bracon is easy for our technicians to reach. Neighbouring places we cover include Belton (1 mile north), Woodhouse (1 mile north), Westgate (1 mile north-west), Stockholes Turbary (1 mile west) and Epworth (2 miles south). Within a short drive, we also cover Scunthorpe (7 miles east), Bottesford (6 miles east), Brigg (14 miles east), Frodingham (8 miles north-east), Crosby (8 miles north-east) and Broughton (11 miles east).
Local landmarks in Bracon
Around Bracon, we work in homes near Church of All Saints, Belton All Saints CofE Primary School and The Wheatsheaf pub, among other places. The nearest railway station is Crowle station, about 2.7 miles north of the centre. Well-known places in the area include Haywain Farm Museum (1.4 miles south-west).
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Places near Bracon
More services for Bracon
What we’re called out for in Bracon
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
These are the problems we are asked about most:
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
- Thin, worn enamel in places
What your quote should include
- How to look after the finish
- How long it needs to cure
- What the guarantee covers, and for how long
- What happens if they find more damage
What we cannot put right
We’ll always be straight with you, so here’s what a repair will not do:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Bracon
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Bracon questions
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your pictures and we will quote them together.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so mention it when you send photos.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Work for landlords and builders
Landlords, letting agents and housing providers in Bracon use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
