Bolton · England
Bath re-enamelling & resurfacing in Bradshaw, Bolton
Local bath re-enamelling for Bradshaw: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
When to call us in Bradshaw
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Common reasons people in Bradshaw contact us include:
- A peeling or bubbling previous coating
- Several chips and rust patches
- Staining under the taps and around the waste
- Wear marks under the taps
Before you book anyone
- Is the price fixed, and does it include VAT?
- What preparation is included
- How long it needs to cure
- What aftercare is recommended
About our bath re-enamelling in Bradshaw
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s chips and rust in more than one place and a roll-top that’s seen better days, we can normally put it right, on pressed steel baths, cast iron baths and Victorian roll-tops alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Bradshaw (BL2, BL7)
- County
- Bolton
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Bradshaw
Bradshaw is about 2 miles north-east of Bolton, in Bolton. Whether you are in the middle of Bradshaw or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Bradshaw is one of 61 towns and villages in Bolton we cover. You can also see our page for Manchester, about 12 miles away.
We cover every part of the BL2 and BL7 postcode area. That includes homes on Rigby Lane, Hulme Road and Turton Road. We also cover the places around Bradshaw: Affetside (1 mile north-east), Four Lane Ends (2 miles east), Turton Bottoms (2 miles north), Hawkshaw (2 miles north-east) and Tottington (2 miles east). Within a short drive, we also cover Horwich (6 miles west), Farnworth (4 miles south), Westhoughton (7 miles south-west), Daubhill (4 miles south-west), Great Lever (3 miles south) and Heaton (3 miles south-west).
Landmarks near Bradshaw
Our customers here include homes close to St Maxentius CofE Primary School, St Maxentius' Church and Canon Slade School, among other places. Other local landmarks include Bradshaw Conservative Club pub (under half a mile south) and Jumbles Country Park (1.2 miles north). Bradshaw’s nearest station is Bromley Cross station, about 0.6 miles north-west. Nearby you’ll also find Blair Hospital (1.3 miles north-west) and Bolton Market Place (2.3 miles south-west). Green spaces nearby include Nob End.
- Local facilities include Tonge with Haulgh (1.2 miles south)
Questions from Bradshaw
What happens after I send photos?
We review the photos and send a fixed quote and the next dates we have.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Repairing versus replacing in Bradshaw
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- We leave the room as we found it
See our prices page or bath cost comparison.
Prices and what affects them
Prices start from £350. There is no charge for travel to Bradshaw. The price comes down to:
- Any earlier repairs that need removing first
- How easy the damage is to reach
- How many areas need work
- Doing more than one item at once
Our prices are the same across the UK, with no extra for Bradshaw. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
Phone photos are fine. Make sure they show:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Where you are, by postcode
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day in most cases. The room is left tidy and ready to use once it has cured.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the day after.
Getting ready for the visit
- Make sure the area is dry
- Clear the area around the damage
- Mention any parking restrictions or tricky access
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
Related advice
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Nearby places to Bradshaw
What else we do in Bradshaw
What a repair cannot fix
We’d rather lose a job than do one that will not last, so these are the limits:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
