Hampshire · England
Bath Re-enamelling in Bramdean
Our repair technicians come to Bramdean for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Bath re-enamelling at your home in Bramdean
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We’re frequently asked to fix a coloured bath you want in white and chips and rust in more than one place, in basins & shower trays, Victorian roll-tops and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Bramdean (SO24)
- County
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Nearby places to Bramdean
Also in Bramdean
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It usually takes a full day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
Bramdean: your questions answered
Can you quote from photos?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote with dates.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Aftercare tips
Once the work has cured, treat it gently:
- Rinse off hair dye, oils and bath bombs immediately
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
- Do not leave bottles, razors or sponges standing on the surface
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
What affects the price in Bramdean
Resurfacing from £350. You will know the full cost before booking. We look at:
- Whether we combine several jobs
- What kind of damage it is
- Any earlier repairs that need removing first
- The size and number of damaged areas
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with nothing added on the day.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- One sharp close-up of the damage
- A wider photo showing the whole bath
If you’re in Bramdean and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About Bramdean
Bramdean is about 8 miles east of Winchester, in Hampshire. Anywhere in SO24, we carry out the work at your property. Our technicians cover all 683 towns and villages across Hampshire, from the larger towns to small villages. We work right across the region, from Bramdean to London (54 miles away).
Here we cover the SO24 postcode area. That includes homes on Wood Lane, Woodlane Close and The Spinney. We also cover the places around Bramdean: Hinton Ampner (1 mile west), Cheriton (2 miles west), Bishop's Sutton (2 miles north), Beauworth (3 miles south-west) and Warnford (3 miles south). Further out, we also cover Basingstoke (15 miles north), Winchester (8 miles west), Havant (14 miles south-east), Eastleigh (11 miles south-west), Fareham (14 miles south) and Horndean (11 miles south-east).
Landmarks near Bramdean
Typical jobs here are in homes near Church of St Simon and St Jude and The Fox Inn and the streets around them. The countryside around Bramdean includes Shutts Copse and Beacon Hill.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Bramdean
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- Everything repaired in place
- Most jobs done in one visit
See our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
