Hampshire · England

Bath Re-enamelling for Beauworth homes

We travel to Beauworth for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Beauworth

What affects the price in Beauworth

Prices start from £350. There’s no charge for travel to Beauworth. The price comes down to:

  • Unusual colours or finishes
  • The material and finish
  • How many areas need work
  • Whether old repairs or coatings need taking off

Our prices are the same across the UK, with no extra for Beauworth. The job itself decides the price: how much damage, what it’s made of and how many items.

Quotes from your pictures

You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:

  • A close-up of the damage, in focus
  • A photo taken from further back
  • Natural light rather than flash
  • Whether it’s been repaired or coated before

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

About our bath re-enamelling in Beauworth

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you’re dealing with a roll-top that’s seen better days and a coating lifting around the plughole, we can help, whatever the material.

You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Where
Beauworth (SO24)
Area hub
Hampshire
Warranty
A year, on every repair
Quote
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

When a repair is not the answer

We will always be straight with you, so here’s what a repair cannot fix:

  • A cast iron or steel bath that is cracked right through
  • Holes rusted through the metal
  • Problems we can’t see until an old finish comes off

If in doubt, send photos and we’ll say what we think before you book.

Surfaces we repair

  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths

The process

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the next day, the bath is ready.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Clear toiletries, mats and anything else from around the area
  • Have somewhere for us to park nearby if possible

How to get a price

Send us photos of the damage and a wider shot of the entire item, with your SO24 postcode, and we will reply with a fixed price.

Get a fixed price

Advice

Beauworth and nearby

Beauworth is about 6 miles east of Winchester, in Hampshire. Jobs in Beauworth are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We cover all 683 towns and villages in Hampshire. We work right across the region, from Beauworth to London (about 57 miles away).

Postcode districts we cover here: SO24. We also cover the places around Beauworth: Cheriton (2 miles north-east), Hinton Ampner (2 miles north-east), Bramdean (3 miles north-east), Warnford (3 miles south-east) and New Alresford (4 miles north). Larger places within reach include Winchester (6 miles west), Havant (14 miles south-east), Eastleigh (8 miles south-west), Fareham (12 miles south), Horndean (11 miles south-east) and Chandler's Ford (10 miles west).

Near you in Beauworth

In Beauworth, that means homes near Church of St James and Milbury's pub and the streets around them. For a walk, there is Shutts Copse and Beacon Hill.

Map of Beauworth © OpenStreetMap contributors

Landlord and trade work in Beauworth

If you manage property in Beauworth, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Different materials, different repairs

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Wipe the bath dry after use in hard water areas
  • Rinse off hair dye, oils and bath bombs immediately
  • Respect the curing time we give you
  • Never use suction bath mats

Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Do you need bath re-enamelling in Beauworth?

Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

The most common problems we are called about are:

  • A peeling or bubbling previous coating
  • A bath that stays dull however much you clean it
  • Worn patches where water runs and sits
  • A bath in a colour that no longer suits

What to look for in a quote

  • Who will actually do the work
  • What the guarantee covers, and for how long
  • Whether the price covers travel
  • What happens if they find more damage

Our hiring checklist

Questions from Beauworth

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

What information do you need?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Can you do the outside of a roll-top?

Yes. Inside and out if you’d like.

Is repairing better than replacing?

Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

How do I get a price for bath re-enamelling in Beauworth?

Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.

Do you need to take the bath out?

Not at all. We work on the bath in place, with the room masked and ventilated.

Do you come to Beauworth?

Yes. We work across the UK and travel to Beauworth and the rest of Hampshire. Send us pictures for a fixed quote, or call 0345 017 0787.

Will the price change on the day?

Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.