Derbyshire · England
Bath Re-enamelling for Breaston homes
Local bath re-enamelling for Breaston: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that will not shift
- Lots of chips and rust spots
About our bath re-enamelling in Breaston
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on acrylic baths, pressed steel baths and cast iron baths, and the jobs we see most are staining under the taps and around the waste and chips and rust in more than one place.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Area
- Breaston (DE72)
- County
- Derbyshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Store bottles off the bath
Wipe the bath dry after use where you can, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Towns and villages near Breaston
More services for Breaston
Breaston and nearby
Breaston is about 1 mile west of Long Eaton, in Derbyshire. We visit homes and businesses in Breaston, so you don’t need to take anything anywhere. Breaston is one of 532 places in Derbyshire we cover. We work right across the region, from Breaston to Birmingham (about 38 miles away).
All of DE72 is within our area. Jobs here include addresses on Bourne Square, Main Street and Manorleigh and the roads around them. We also cover the places around Breaston: Draycott (1 mile west), Church Wilne (1 mile south-west), Great Wilne (2 miles south-west), Ambaston (2 miles west) and Shardlow (2 miles south-west). Further out, we also cover Swadlincote (13 miles south-west), Ilkeston (5 miles north), Belper (11 miles north-west), Heanor (8 miles north), Ripley (11 miles north) and Langley Mill (8 miles north).
Around Breaston
Locally, our jobs take us to homes close to The Bull's Head pub, Church of St Michael and Western Mere Secondary School, among other places. Also close by are Wilsthorpe Business and Enterprise College (1.1 miles east), Firfield Primary School (less than half a mile south-east) and West Park (1.4 miles east). Breaston’s nearest station is Long Eaton station, roughly 1.5 miles south-east. A little further out are Aston Hall Hospital (4 miles south-west) and Museum of the Mercian Regiment (3.2 miles east). Open spaces near Breaston include Attenborough Nature Reserve.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Derbyshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around Breaston, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
How it works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. It typically takes the best part of a day, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
Your questions about bath re-enamelling in Breaston
How do I get a price for bath re-enamelling in Breaston?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Repair or replace in Breaston?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Same prices wherever you are
- Dust sheets down, tidy finish
See our prices page and resurfacing vs replacement cost guide.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
When to call us in Breaston
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Send us a picture if you notice any of these:
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
- A roll-top that’s seen better days
- Brown or grey marks that do not clean off
Before you book anyone
- When it can be used again
- What preparation is included
- What protection goes down before work starts
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
