Stockport · England
Bath Re-enamelling for Bredbury homes
Our technicians come to Bredbury for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Bredbury
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We’re frequently asked to fix a dull, rough surface that won’t come clean and an outdated colour you’d like to change, on cast iron baths, pressed steel baths and acrylic baths.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Bredbury (SK6)
- Area hub
- Stockport
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing generally wins. Prices start from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Everything repaired in place
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
- Free fixed quotes from pictures
Take a look at our prices page and bath cost comparison.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Keep suction mats out of the bath
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Don’t leave bottles, razors or sponges standing on the surface
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Nearby places to Bredbury
Other services in Bredbury
Common questions in Bredbury
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you cover Bredbury?
Yes, we do. We send a technician to Bredbury for every job, and the price is the same as everywhere else.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
What we’re called out for in Bredbury
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
These are the problems we are asked about most:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that don’t clean off
Before booking anyone
- How changes to the job are handled
- A fixed price, and whether VAT is included
- Whether they match the colour on site
- How your room will be protected
What a repair cannot fix
We will not take on work that will not last, so these are the limits:
- A cast iron or steel bath that is cracked right through
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to most of the day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Make sure the area is dry
- Point us to the nearest place to park
Ask for a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Covering Bredbury
Bredbury is about 2 miles south of Denton, in Stockport. Wherever you are in the SK6 postcode area, we come to you. Bredbury is one of 42 places in Stockport we cover. You can also see our page for Manchester, about 6 miles away.
Postcode districts we cover here: SK6. That includes homes on Elderfield Drive, Elm Street and Firsby Avenue and the roads around them. We also cover the places around Bredbury: Brinnington (1 mile north-west), Portwood (2 miles west), Haughton Green (2 miles north), Reddish Vale (2 miles north-west) and Offerton Park (2 miles south-west). Larger places within reach include Cheadle Hulme (5 miles south-west), Burnage (4 miles west), Hazel Grove (3 miles south), Bramhall (4 miles south-west), Cheadle (5 miles south-west) and Marple (3 miles south-east). Being one of Stockport’s larger places, Bredbury sees plenty of our work.
What’s near Bredbury
Around Bredbury, we work in homes near Offerton School, St Mark's Church of England Primary School and The Greyhound pub. Nearby too are Harrytown Catholic High School (0.6 miles south) and Church of St Mark (less than half a mile north-east). There is a railway station in Bredbury itself: Bredbury station. Other landmarks nearby include Stepping Hill Hospital (2.7 miles south) and Merseyway Shopping Centre (2.2 miles west). Not far away are Eastwood Nature Reserve and Werneth Low.
- Local facilities include Stockport Rural District (0.9 miles south)
About our accreditations · Every repair comes with a one-year guarantee.
