Stockport · England
Bath re-enamelling & resurfacing in Burnage, Stockport
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Burnage. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We work for landlords, letting agents and housing providers in Burnage as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How we handle bath re-enamelling in Burnage
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Common call-outs are for thin, worn enamel in places and chips and rust in more than one place, on pressed steel baths, basins & shower trays and cast iron baths.
Whatever the size of the job, you get the same one-year guarantee in Burnage and across Stockport.
- Location
- Burnage (M20, M19, SK4)
- Area hub
- Stockport
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Burnage
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Get in touch if you’ve noticed:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- What preparation is included
- How long the guarantee is and what it covers
- Who will actually do the work
- When it can be used again
Nearby places to Burnage
What else we do in Burnage
Repair or replace in Burnage?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Why Burnage clients choose us
- Rooms protected and left tidy
- Colour mixed on the day to match
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page and guide to resurfacing and replacement costs.
FAQs for Burnage
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Do you work in Burnage?
Yes, we do. We send a technician to Burnage for every job, and the price is the same as everywhere else.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How long is the bath unusable?
Normally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
What affects the price in Burnage
Prices start from £350. You won’t pay by the hour. The price depends on:
- Where the damage is and how we get to it
- The material
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Two or three clear pictures are typically enough. Try to include:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Natural light rather than flash
- One picture of the whole bath
Most clients in Burnage get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Where we work around Burnage
Burnage is about 3 miles north-west of Stockport, in Stockport. Wherever you are in the M20 postcode area, a technician comes to you. We work in all 42 towns and villages across Stockport, from the larger towns to small villages.
Jobs in M20, M19 and SK4 work the same way as everywhere else we cover. Jobs here include addresses on Oak Road, Fog Lane and Alan Road and the roads around them. We also cover the places around Burnage: Ladybarn (1 mile north), Heaton Mersey (1 mile south), East Didsbury (1 mile south), Fallowfield (1 mile north) and Didsbury (1 mile south-west). Larger places within reach include Stockport (3 miles south-east), Cheadle Hulme (4 miles south), Hazel Grove (5 miles south-east), Bramhall (5 miles south-east), Marple (6 miles east) and Bredbury (4 miles east). Burnage is one of the larger places we cover in Stockport.
Near you in Burnage
Around Burnage, we work in homes near Albion Inn, Fog Lane Park and Stella Maris School. Nearby too are Ladybarn Primary School (under half a mile north), Church of St Nicholas (under half a mile south) and Burnage Academy for Boys (under half a mile east). There’s a railway station in Burnage itself: Burnage station. A little further out are Christie Hospital (0.8 miles west) and Merseyway Shopping Centre (2.4 miles south-east). The countryside around Burnage includes Unicorn Grocery.
- Other local spots include Alexandra Park (2.3 miles north-west)
What a repair cannot fix
It helps to know what we cannot do:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Send us pictures and we will tell you honestly.
Materials we work on in Burnage
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Looking after it afterwards
How the surface is treated afterwards matters:
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs immediately
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
The process
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. Allow most of the day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
