Norfolk · England
Bath re-enamelling & resurfacing in Briggate, Norfolk
Full bath re-enamelling and resurfacing for homes and businesses in Briggate and across Norfolk. Send photos for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Your questions about bath re-enamelling in Briggate
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Do you cover the entire of Norfolk?
We work UK-wide. Prices don’t change with location.
How do I get a price for bath re-enamelling in Briggate?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you work in Briggate?
Yes. We cover the whole UK and come to Briggate and the rest of Norfolk. Send pictures and we’ll quote, or call 0345 017 0787.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
How we handle bath re-enamelling in Briggate
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix worn patches where water runs and sits and an outdated colour you’d like to change, across pressed steel baths, cast iron baths and acrylic baths.
Big or small, it’s backed by a one-year guarantee in Briggate and across Norfolk.
- Area
- Briggate (NR28)
- Area hub
- Norfolk
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Other services in Briggate
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Generally one visit, start to finish
- No need to remove anything
- A year’s guarantee on all work
- A fixed quote before booking
Read our prices page and bath cost comparison.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- Whether we combine several jobs
- The type of damage
- Where the damage is and how we get to it
A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
You can take the photos on your phone. Just ensure we can see:
- The material, if you know it
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- The postcode, so we can plan the visit
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Keeping it looking good
So the finish stays in good condition for years:
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
When we’d advise against a repair
A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
Send us photos and we will tell you honestly.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Landlord and trade work in Briggate
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
How to get a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
About Briggate
Briggate is about 3 miles south-east of North Walsham, in Norfolk. Our repair technicians come to homes and businesses in Briggate and nearby villages, so you don’t need to take anything anywhere. Our technicians cover all 797 towns and villages in Norfolk.
Here we cover the NR28 postcode area. You’ll find streets such as Meeting House Hill Road and White Horse Lane, all of which we cover. Other places close to Briggate include Bengate (1 mile west), Lyngate (1 mile south-west), Honing (1 mile east), Worstead (1 mile south-west) and Dilham (2 miles south-east). Larger places within reach include Norwich (12 miles south-west), Sprowston (11 miles south-west), Thorpe St Andrew (12 miles south), North Walsham (3 miles north-west), Sheringham (14 miles north-west) and Norwich Lanes (13 miles south-west).
Landmarks near Briggate
We visit homes around North Walsham High School, Church of St Peter and St Paul and Worstead Church of England Primary School. Briggate’s nearest station is Worstead station, roughly 1.6 miles south-west. Well-known places in the area include Norfolks Golden Fleece Heritage Museum (0.8 miles north-west) and Dilham Castle (1.4 miles south-east). Open spaces near Briggate include Barton Broad.
About our accreditations · Every repair comes with a one-year guarantee.
