Devon · England
Bath Re-enamelling in Broadhembury
Fixed-price bath re-enamelling in Broadhembury and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Thin, worn enamel in places
About our bath re-enamelling in Broadhembury
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Our technicians work on pressed steel baths, acrylic baths and cast iron baths, and people most frequently call us about an original cast iron bath that needs restoring and a peeling or bubbling previous coating.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Location
- Broadhembury (EX14)
- Region
- Devon
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
We won’t take on work that will not last, so these are the limits:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Towns and villages near Broadhembury
More services for Broadhembury
Our work in Broadhembury
Broadhembury is about 5 miles north-west of Honiton, in Devon. We visit homes and businesses in Broadhembury and the surrounding area, so there’s no workshop to go to. Broadhembury is one of 586 places in Devon we cover.
We work across EX14 and the streets around it. We also cover the places around Broadhembury: Wolverstone (2 miles east), Payhembury (2 miles south), Sheldon (2 miles north), Dunkeswell (3 miles north-east) and Norman's Green (3 miles west). Further out, we also cover Exeter (13 miles south-west), Exmouth (15 miles south), Tiverton (10 miles north-west), Sidmouth (10 miles south), Honiton (5 miles south-east) and St Thomas (14 miles south-west).
Local landmarks in Broadhembury
We visit homes around Church of St Andrew and Broadhembury Church of England Primary School and the streets around them. Broadhembury’s nearest station is Feniton station, about 3.5 miles south. A little further out are Dunkeswell Memorial Museum (3.1 miles north-east). For a walk, there is Hartridge Hill.
What we’re called out for in Broadhembury
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
The things customers generally mention when they call include:
- A roll-top that’s seen better days
- Several chips and rust patches
- Stains that will not shift
- An outdated colour you’d like to change
Questions to ask before you book
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- How to care for the finish
- Whether cleaning and preparation are in the price
Broadhembury questions
Do you come to Broadhembury?
We do. Technicians travel to Broadhembury from across the region, with no extra charge for travel.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Are there extra charges for Broadhembury?
No. Our quotes include travel, and we charge the same wherever you are.
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for a full day from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Make sure the area is dry
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Landlord and trade work in Broadhembury
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why us?
- One-year guarantee on every repair
- Everything repaired in place
- No extra charge for your area
- Dust sheets down, tidy finish
Take a look at our pricing and bath cost comparison.
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Broadhembury. The price depends on:
- How many items we do on one visit
- How hard the colour is to match
- The material and finish
- How easy the damage is to reach
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- Details of any past repairs
- A wider photo showing the whole bath
- A close-up of the damage, in focus
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
