Cheshire East · England
Bath re-enamelling & resurfacing in Broken Cross, Cheshire East
Damaged bath in Broken Cross? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A coloured bath you want in white
Broken Cross and nearby
Broken Cross is about 1 mile west of Macclesfield, in Cheshire East. We visit homes and businesses in Broken Cross and nearby villages, so you don’t need to take anything anywhere. Broken Cross is one of 254 towns and villages in Cheshire East where we work. We work right across the region, from Broken Cross to Manchester (about 15 miles away).
Jobs in SK10 and SK11 are booked in the same way as anywhere else. We regularly work on streets such as Meg Lane, Ivy Road and Eldon Road and the roads around them. Being close to the A537, Broken Cross is simple for us to get to. Neighbouring places we cover include Henbury (1 mile west), Whirley Grove (1 mile north-west), Macclesfield (1 mile east), Moss Houses (2 miles south) and Lower Pexhill (2 miles south-west). Larger places within reach include Congleton (7 miles south), Wilmslow (6 miles north-west), Knutsford (9 miles west), Middlewich (13 miles south-west), Sandbach (11 miles south-west) and Poynton (6 miles north).
What’s near Broken Cross
We visit homes around West Park, Broken Cross Primary Academy and Nursery and The Fallibroome Academy, among other places. Other local landmarks include All Hallows Catholic College (0.8 miles east) and St John the Evangelist (less than half a mile east). The nearest railway station is Macclesfield station, roughly 1.6 miles east. Nearby you’ll also find West Park Museum (1 mile east) and Parkside Hospital (less than half a mile north-east). The countryside around Broken Cross includes Danes Moss Nature Reserve and Kerridge Hill.
- Other local spots include Macclesfield (1.4 miles east)
About our bath re-enamelling in Broken Cross
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for an old resurfacing that’s failing and a roll-top that’s seen better days, in acrylic baths, Victorian roll-tops and pressed steel baths.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Where
- Broken Cross (SK10, SK11)
- County
- Cheshire East
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Towns and villages near Broken Cross
More services for Broken Cross
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Previous DIY repairs that have to come out
- How much damage there is
- Whether we combine several jobs
- What kind of damage it is
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
Most quotes are done from photos alone. To make it quick:
- Any details about the material
- A clear, close picture of the problem area
- A picture taken from further back
- Details of any past repairs
To get a price, send a couple of photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
How it works
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. Allow a full day.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Broken Cross customers choose us
- We leave the room as we found it
- Generally one visit, start to finish
- Colour mixed on the day to match
- Technicians who travel to you, UK-wide
Take a look at our full price list and resurfacing vs replacement cost guide.
Broken Cross questions
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How long will the bath be out of use?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t use the bath until it has fully cured
- Have chips seen to early
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
