Norfolk · England
Bath Re-enamelling in Brooke
Bath re-enamelling for Brooke, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
Where we work around Brooke
Brooke is about 7 miles south-east of Norwich, in Norfolk. Clients in Brooke get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Brooke is one of 797 towns and villages in Norfolk where we work.
Our technicians cover all of the NR15 postcode area. You will find streets such as The Street, Norwich Road and Windermere Close. We also travel to Howe (1 mile north-west), Kirstead Green (1 mile south), Bergh Apton (2 miles north-east), Alpington (2 miles north) and Yelverton (2 miles north). Further out, we also cover Norwich (7 miles north-west), Wymondham (11 miles west), Gorleston-on-Sea (15 miles east), Sprowston (8 miles north), Thorpe St Andrew (7 miles north) and Attleborough (15 miles west).
Local landmarks in Brooke
In Brooke, that means homes near St Peter's Church, Kings Head Public House and Brooke Voluntary Controlled Church of England Primary School, among other places. Other landmarks nearby include Claxton Castle (4.2 miles north-east) and St Andrew's Hospital (5.9 miles north). Green spaces nearby include RSPB Surlingham Church Marsh.
Bath re-enamelling at your home in Brooke
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. We are often asked to fix an original cast iron bath that needs restoring and a bath in a colour that no longer suits, in acrylic baths, pressed steel baths and cast iron baths.
We stand behind the work with a one-year guarantee.
- Area
- Brooke (NR15)
- Area hub
- Norfolk
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Brooke
More services for Brooke
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Landlord and trade work in Brooke
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Brooke use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It usually takes most of the day, and you’re welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- How many items we do on one visit
- Access to the area
- What kind of damage it is
- How many areas need work
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what helps:
- Daylight if possible, and no flash reflection
- Any details about the material
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
Send us pictures of the damage and one of the entire item, with your NR15 postcode, and we will come back with a fixed quote.
FAQs for Brooke
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, normally with dates to choose from. You are under no obligation.
Are there extra charges for Brooke?
Travel is included in the price, with the same prices everywhere we work.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
When to call us in Brooke
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Common reasons people in Brooke contact us include:
- A roll-top that is seen better days
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
Comparing quotes
- A fixed quote, and whether VAT is included
- How your room will be protected
- If travel is included in the price
- How to care for the finish
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why us?
- Colours mixed by hand to suit your surface
- One visit for most repairs
- Work done at your home or business
- One-year guarantee on every repair
See our full price list and guide to resurfacing and replacement costs.
Honest limits
We would rather lose a job than do one that will not last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
