Gloucestershire · England
Bath re-enamelling & resurfacing in Brookthorpe, Gloucestershire
Bath re-enamelling for Brookthorpe, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Brookthorpe
The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the following day. Common call-outs are for a coating lifting around the plughole and a bath that stays dull however much you clean it, in cast iron baths, pressed steel baths and acrylic baths.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Brookthorpe (GL4)
- Region
- Gloucestershire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Brookthorpe
Do you cover the whole of Gloucestershire?
We cover the whole UK, including Brookthorpe and the rest of Gloucestershire. Just include your postcode and we’ll confirm dates.
Will there be a smell?
Expect a mild smell while we’re working.
Can a failed resurfacing be redone?
Generally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Also near Brookthorpe
More services for Brookthorpe
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Unusual colours or finishes
- The size and number of damaged areas
- The material and finish
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Quotes from your photos
You can take the photos on your phone, there’s no need for anything special. Make sure they show:
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- A wider photo showing the entire bath
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
About Brookthorpe
Brookthorpe is about 2 miles south-east of Quedgeley, in Gloucestershire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. We work in all 470 towns and villages in Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 48 miles away.
Every address in GL4 is covered, from the main roads to the quietest streets. You’ll find streets such as Maitlands and Wynstones Drive, and we cover them all. We also cover the places around Brookthorpe: Whaddon (1 mile north), Hunts Grove (1 mile west), Kingsway Village (2 miles north-west), Matson (2 miles north-east) and Tuffley (2 miles north-west). We also work in nearby towns such as Cheltenham (9 miles north-east), Gloucester (3 miles north), Stroud (4 miles south), Tewkesbury (13 miles north), St Paul's (9 miles north-east) and Cirencester (13 miles south-east).
Near you in Brookthorpe
Around Brookthorpe, we work in homes near St Peter's High School and St Swithun's Church. Brookthorpe’s nearest station is Gloucester station, roughly 4 miles north of the centre. A little further out are Coney Hill Hospital (3.1 miles north-east) and Harescombe Castle (1.1 miles south). For a walk, there’s Frome Banks and Robinswood Hill.
How the visit works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Signs you need bath re-enamelling in Brookthorpe
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The most common problems we are called about are:
- A dull, rough surface that won’t come clean
- A roll-top that is seen better days
- An outdated colour you’d like to change
- An old resurfacing that is failing
Questions to ask before you book
- How long the guarantee is and what it covers
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- If travel is included in the price
Honest limits
To be straight with you, some problems need a different fix:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Steel that has corroded right through
Send us photos and we will tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Normally one visit, start to finish
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
Read our full price list and bath cost comparison.
Landlord and trade work in Brookthorpe
Housing associations and facilities teams use us for planned and reactive repairs in Gloucestershire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
If you manage property in Brookthorpe, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
